Impact sound deading for rigid, level substrates: 16 dB
wedi Nonstep Plus impact sound deadening board consists of a 6 mm wedi building board bonded in the factory to a 5 mm rubber mat, with a rubber overlap. The impact sound deadening board is used for decoupling under ceramic floor coverings, laminate or ready-to-lay parquet.
Bottom polyurethane-bonded recycled rubber material with styrofoam flakes
Top 6 mm wedi building board bonded with a rubber mat at the factory, creating an overlap.
Temperature resistance - -40°C to 75°C
Impact sound deadening Δ L = 16 dB in accordance with DIN 52210 (tested on concrete ceiling, under tiles) W,R
• Thin-layer impact sound
insulation under tiles, laminate
and ready-to-lay parquet
• On all load-bearing floors indoors
• Low structural height
• Low structural height
• Low mass per unit area
• Simple to lay, an economic way of reducing impact sound
under ceramic and natural stone floor coverings
• Quick installation
• Stress-reducing board, decouples the covering from the surface
• Impact sound improved by 16 dB
• For decoupling ceramic and natural stone floor coverings
from the substructure
• For deadening impact sound when laying ceramic and natural
stone floor coverings with a relatively low design height
• On all load-bearing surfaces such as concrete, wooden
floorboards (not stairs)
• Underlay for floating floor coverings such
as ready-to-lay parquet or laminate
• Not for use under electric thin-bed heating elements
• For residential type use. Not approved for wheeled loads
with high concentrated loads.