|
|
Wall recessed signal luminaire for 3W SMD LEDs technology (Light Emitting Diode).
Pre-installation frame with clipping system and LED included. Frontal and body made of stamped steel sheet.
Anodised matt aluminium reflector (99,9% purity).
Matt protective glass.
Class III luminaire. |
|
|
Rectangular methacrylate plate measuring 195x320 mm with an engraved emergency sign adhered to the back and a thin decorative aluminium contour on the top so that it blends perfectly with the surroundings. Left wall pennant fitting system. These are the methacrylate signs, with a battery-powered maintained light module. An internal microprocessor checks the status of the device and periodically performs functionality and autonomy tests and reports the status. If the luminaire is connected to a Central TMA, the details of its status are sent through this module to a control computer, which can monitor the status of the entire emergency lighting system.
|
|
Housing: Vandal-resistant, self-extinguishing, UV-stabilized, anti-yellowing grey polycarbonate, .
Diffuser: Vandal resistant, V2 self-extinguishing, UV-stabilised clear polycarbonate.
Equipment: with bracket
Regulations: Manufactured in compliance with EN60598 - CEI 34 -21 standards. The level of protection complies with the EN60529 standard.
S.A. Emergency (Maintained): In the event of a black-out the one lamp connected to the back-up circuit stays on, thus avoiding the inconvenience caused by a sudden absence of all light.
Emergency run time: 180 minutes. When power is restored, the battery recharges automatically in 24 hours. |
|
Single-battery emergency light with 3-hour emergency light duration and 32-m recognition range
Delivered complete with mounting accessories
Symbol panel must be ordered separately
Includes illuminants, 18x LEDs |
|
| Ceiling-mounted luminaire WINDOW-SAVE, for 1 x fluorescent tube 8W, housing in aluminium, white, high-gloss reflector, clear acrylic glass disc, with electronic control gear, with fluorescent tube, with 2 x pictogram, without battery pack Protection class I, IP40 Recognition wide: 28 m L = 320 mm B = 54 mm H = 301 mm |
|
Exit sign
Light the way
Yacht names are not the only reason to use Yachtlite lettering:
Illuminating door or guidance signs ensure clarity day and night. |
|
Description:
Square body with pronounced edges. Consists of a fluorescent tube that is switched on if the mains power fails.
Characteristics:
Format: Orto Pennant, Recessed and Surface
Operation: Non-maintained, Maintained, Combined, Autotest and TCA
Voltage: 230 V 50Hz
Autonomy (h): 1, 2 and 3
Emergency lamp: FL 6W, PL 11W
Charging indicator: LED
Mains lamp: FL 6W, PL 11W
Degree of protection: IP42 IK04
Electrical insulation: Type II
Test device: For Autotest and TCA models
Remote stand-by: Yes
|
|
|
Square body whose front parts form a slightly curved plate which can be adjusted either horizontally or vertically. Consists of a decorative housing made of PC/ASA and a polycarbonate diffuser. Contains two fluorescent lamps; an emergency light that only switches on if the network power supply fails, and another that acts as a normal luminaire that can be switched on and off at will while voltage is supplied.
|
|
|
Square body with pronounced edges, comprising a housing made of PC/ASA and a polycarbonate diffuser. Contains two fluorescent lamps; an emergency light that only switches on if the network power supply fails, and another that acts as a normal luminaire that can be switched on and off at will while voltage is supplied.
|
|
|
Rectangular body with pronounced edges, comprising a polycarbonate housing and diffuser. Contains two fluorescent lamps; an emergency light that only switches on if the network power supply fails, and another that acts as a normal luminaire that can be switched on and off at will while voltage is supplied.
|
|
|
Round body with pronounced edges that consists of a housing made of PC/ASA and a polycarbonate diffuser. Contains two fluorescent lamps; an emergency light that only switches on if the network power supply fails, and another that acts as a normal luminaire that can be switched on and off at will while voltage is supplied.
|
|
|
High-power self-contained projectors come on when the voltage falls below 70% of the nominal value. The lights are directional and designed for lighting large areas, shopping centres, etc..
|
|
|
Rectangular body with pronounced edges, comprising a polycarbonate housing and diffuser. Contains two fluorescent lamps; an emergency light that only switches on if the network power supply fails, and another that acts as a normal luminaire that can be switched on and off at will while voltage is supplied. An internal microprocessor checks the status of the device and periodically performs functionality and autonomy tests and reports the status using the two LED indicator lights that it includes. The tests can be requested manually by means of an ON Remote Control order when connected to the mains.
|
|
|
Rectangular body with raised edges that consist of an aluminium housing and a polycarbonate diffuser. With a mounting system for connection to a rail. Consists of a fluorescent tube that is switched on if the mains power fails
|
|
|
Rectangular body whose visible side is a slanted surface with rounded edges. Consists of a decorative housing made of PC/ASA and a polycarbonate diffuser. Contains two fluorescent lamps; an emergency light that only switches on if the network power supply fails, and another that acts as a normal luminaire that can be switched on and off at will while voltage is supplied.
|
|
|
Circular body with rounded edges. Consists of a decorative housing made of PC/ASA and a polycarbonate diffuser. Contains two fluorescent lamps; an emergency light that only switches on if the network power supply fails, and another that acts as a normal luminaire that can be switched on and off at will while voltage is supplied.
|
|
|
Aluminium and borosilicate glass housings made in accordance with European directives 93/68/CE, 89/336/CE and 94/9/CE governing electromagnetic and explosive atmosphere compatibility. Classification: II2G EEX d IIC T6 - II2D IP 67 T85ºC. Contains two fluorescent lamps; an emergency light that only switches on if the network power supply fails, and another that acts as a normal luminaire that can be switched on and off at will while voltage is supplied. An internal microprocessor checks the status of the device and periodically performs functionality and autonomy tests and reports the status using the two LED indicator lights that it includes. The tests can be requested manually by means of an ON Remote Control order when connected to the mains.
|
|
Wall plate SICURLINE
Safety signs
With safety pictogram.
Design: flat modular elements
Dimensions: small-medium-big size
Uses: indoor and outdoor
Applications: targhe e pannelli a parete, targhe a bandiera e sospese, da tavolo, su supporto da terra e su palina ovale; con o senza cornice
Materials: piastre in alluminio, anodizzato o verniciato, con terminali in materiale plastico, cornici in alluminio verniciato con angolari in materiale plastico. Montanti e supporti in alluminio anodizzato o verniciato completi di base in acciaio zincato e rivestita superiormente con alluminio.
Graphics: prevalentemente permanente in vinile prespaziato o in stampa digitale adesiva; in taluni casi è possibile avere della grafica intercambiabile su supporto cartaceo oppure integrando il sistema dei moduli Clip |
|
MULTI-SAVE
Wall-mounted luminaire MULTI-SAVE, for 2 x fluorescent tube 8W, maintained mode, recognition 30m, in aluminium profile, silver anodised, opal acrylic glass cover, protection degree IP40, with LED control display, with battery pack, with emergency pack, with 2 x fluorescent tube, with pictogram, B = 321mm, H = 168mm, A = 100mm |
|
| ... products without information |
| |
|
|
Emergency exit signs and lighting
