|
|
|
|
|
|
- Programming day laborer or weekly magazine 2 zones
- Manager of energy 2 zones with indicator of detailed consumption
- Time-lag Exemption of 15 minutes zone from 72 hours
- Programmable Absence from 1 to 365 days
- Permanent Exemption by serrated roller
- Locking of the programs
- Unballasting single-phase current cascadocyclique® on 3 or 4 ways in single-phase current (phase by phase in three-phase current) with selection of a way to be lightened as a last resort + ECS
- Detection of inversion of wiring Pilot phase/Wire
- Optimization of the increase in temperature (with option external Radio probes - ref. 6300036)
- Profit of the calculation of C of the RT 2005
- Management of night on-ventilation (with option external Radio probes)
- Food 230 V
- Nonpolarized Bus of communication 2 wire between the modular box and the box of environment
- 3 exits Wire Controls 6 orders + 1 configurable exit ECS at 4th Pilot exit Wire or night ordering of on-ventilation
- Connection TV-information electronic meter or EM.TI.
- Reserve of permanent step of the programs and the clock of 2:00
- Radio bidirectional X2D in the box of environment
- Fixing on box of embedding (Ø 60 mm) or base covered (in option - ref. 6200271)
|
|
- Manager of energy 8 zones, residential or micro tertiary, for the restoration of installations deprived of Pilot wiring Wire
- Programming and unballasting by Transmission current
- Programming independent of 4 automations
- Weekly Programming 8 zones for electric heating via receivers CPL X2D
- 1 program per day (6 adjustable commutations per day at the minute)
|
|
HEM-1 is an occupancy-oriented HVAC energy management system specially designed for lodging industry. By utilizing an advanced occupancy sensing technology, this system is able to control the guestroom HVAC operation according to the occupancy status.
An advanced microprocessor and sophisticated logic control software enable the system to smartly verify the occupancy status of the room. When guestroom is physically occupied, the system gives the HVAC control to the hotel guest. After the room is vacant, the HEM system will control the HVAC operation as set.
The HEM-1 system ensures no compromise in guest comfort level, while creating significant energy saving to the hotel management.
|
|
Techtile System is fit with Techtile Control, the sophisticated, advanced electronic management system that ensures full, direct control over the system from right inside the home.
It constantly monitors system function, the sun’s rays and the roof temperature, showing the possible changes in state and any malfunctions that could occur.
Techtile Control also acts as a chronothermostat, regulating the temperature in the rooms while Techtile Energy electronically detects any operating anomalies in the photovoltaic tiles, thus permitting direct, simplified maintenance.
Techtile Control has been developed in a range
of colours that currently includes: black - silver - white.
|
|
|
|
|
|
The innovative thermoregulator OMNIBUS solved elegantly every applicative situation connected the easily use with a wide function availability.
The most interesting point is that this system invented by EURAPO could grow based on the dimension and characteristic of the system.
The system present an own flexibility employment, based on few elements, easy to install and intuitive on configuration and use.
There are different type of remote console: from the simple Analogue control, to the elegant and complete Display control, to the Infrared control.
An accurate planning made possible the realization of a product with a particular and elegant design: Omnibus could be configured based on the different customer requirement with extreme facility and allow a weekly and seasonal planning of all the functions.
The Omnibus digital system is designed to manage and control the water terminal unit (fan coil units, water cassette units and high pressure ducted fan coil units) for domestic use, residential buildings, public rooms, moreover Omnibus could be integrated with BMS (Building Management System).
Omnibus is a supervisor for small system connected via MODBUS RTU and it can manage one or all of the units in the system at the same time via Web Server (suitable with Internet Explorer 6.xx).
The OCB20 converter permits to connect 10 water terminal unit; it gives information about the units to the Lonmark net and it receives information from the Lon net.
|
|
The elegant and compact design and 3 different colours (black, white and silver) characterize this simple hand-held transmitter. The up-down-stop function is easy to use due to big buttons.
Fitting BRFE01, BRFE15 and BRFE20
A nicely shaped holder for wall fastening is included.
Single-channel sender
Standard batteries
|
|
Welcome to "Instant heat without pre-heating"
Radiant heating systems with infrared short-wave technology for home, commercial and industrial use and for public buildings!
Radiant heat at the push of a button: The revolutionary infrared short-wave technology of our radiant heaters instantly provides comfortable heat as soon as it is turned on. The high-frequency heat waves penetrate the air without warming it. The result is energy-efficient, effective heat beamed precisely where it is needed - at people, objects and materials. This happens without the usual problems - pre-heating and its associated cost; loss from drafts or because hot air rises.
Heating & Drying - Indoor & Outdoor - Areas & Objects - Materials & Processes ...
|
|
PoSwitch is a small relay module designed to replace the cable outlet that supplies electricity to appliances such as electric heater, air conditioner or others
It can communicate with a room manager through the existing electrical installation (power line carrier network).
The PoSwitch module can control the power consumption of a heater connected to it by varying the on-off cycle. You can set the power level from the room-manager.
And like other modules, you can link the PoSwitch to any applications running in the room manager, for example to the "Preheat" function on the "Morning-Call" application.
Features:
- Replace cable outlet, fits into flush-mount round mounting box of 60mm diameter, 30mm depth.
- Switch up to 3600W (16A) loads, such as electric heater, air conditioner, etc.
- Power Cycling function, with 16 levels of duty cycle, to control heating power level.
- Communicate to the room manager via the powerline network.
|
|
|
The KWB Comfort is used to operate all KWB heating systems. Apart from controlling the burner, it also provides comprehensive heat management-from a one-family house to a local heating network.
|
|
Flexibility, utilisation value and energy saving are the three main requirements for utility buildings (administration, office and public buildings, schools, hospitals, etc.). Apart from recouping investment costs, so-called life-cycle costs are also becoming increasingly important. These are made up of the investment costs (construction costs and planning) and all operating costs arising during the life of a building.
During the planning and construction phase of a new building, keeping to
the planned building costs often becomes an issue. Nobody seems, however, to be looking at the future operating costs although, according to a study produced by A.T. Kearney, these can be up to 20% of the construction cost each year. This percentage generally rises as a result of
increasing flexible use requirements. On average, operating costs have exceeded investment costs after seven years.
|
|
|
In addition to comfort and safety, long-term sustainability, efficiency and flexibility are growing in importance in the private and commercial building field. This is no problem for the JUNG KNX system. Thanks to the networking of individual functions, it ensures an %u201Cintelligent building%u201C. The KNX sensors integrate the building into a network of devices that communicate with each other and automatically control the use of e.g. lighting, heating, air conditioning and blinds control. This also optimises the use of energy and saves on operating costs.
|
|
|
|
|
|
The right room temperature contributes decisively towards our feeling of well-being in all situations. Needs differ greatly in this respect, depending on where one lives and how one personally reacts to temperatures. While room temperatures of 16°C to 18°C suffice for the kitchen and bedroom, we like to have a cosy temperature of 21°C in the living room and, perhaps, even 22°C in the bathroom.
A feeling of well-being, both in private life and in the work environment, is extremely important for us as human beings. Consequently, thermal comfort is also very important as far as the health and well-being of people is concerned, because they spend 95% of their time in buildings.
But the need for comfort and cosiness does not cease when we leave our own "four walls". All the other indoor areas where we spend time (shopping centres, restaurants, sports centres, offices, ....), as different as they are from one another, should also have an appropriate temperature.
A person feels uncomfortable when the body's temperature-regulating system (the skin) is subject to stress, e.g., as a result of too low or too high air and wall temperatures, strong air movements, too low or too high humidity and to light or too heavy clothing. In these cases, concentrations of heat, or heat losses occur in the body. A person feels comfortable when the air temperature, air movement, humidity and wall temperatures are in a balanced ratio to their activity and clothing. Comfortableness and wellbeing are also favourably influenced by the cleanliness of the air and a low noise level in the room.
With an increasing demand for comfort and a reduction in energy consumption, environmental consciousness becomes more and more a part of our lives. In private households in Germany, approx. 70% of the energy consumed is for heating and hot water. Calculated on the basis of the energy consumption in the country as a whole, 30% of the total energy is consumed for heating and hot water alone. The objective when planning any heating/air-conditioning system is to achieve the desired level of comfort and cosiness while saving as much energy as possible. This is of benefit to the environment, our purse and our well-being.
In the following, it will be shown how an individual room temperature control system can be planned and installed without difficulty.
|
|
system of contôle of the temperature item by item
tertiary range
Contrôlede temperature item by item for residences, writing desks and trade agencies
By its system of data transmission single, Prozone 2 offers to each flexibility installation and user-friendliness for an optimum comfort: - management personalized by zone of occupation, - aeraulic solution guaranteeing a diffusion controlled and adapted to each configuration of room.
|
|
Comprehensive ranges of HVAC controllers (room controllers and primary equipment) , infrared or radio accessories fully compatible with all RJ9 digital link & remotes controllers.
*HVAC controllers connected in a distributed way to the HVAC devices.
*Primary equipment for controlling the production units (ATU, boilers, circuits...).
*User control devices: hard-wired room devices, infrared or radio remote controllers.
*They can operate in stand alone mode, can be connected to the LONWORKS® network or configurated by "KarnoWeb" server.
|
|
Manage heating with telephone dialling device
Selecting with telephone commands, via telephone dialling device, the timer thermostat operating mode (manual programme or pre-set automatic
programmes).
In homes with combined Burglar-alarm and Automation systems, the heating can be controlled remotely by sending telephone commands to the telephone dialling device. This device, suitably programmed, activates an actuator of the Automation system whose contacts are connected to the timer thermostat "remote" control terminals. When the contacts are closed, the timer thermostat is ready for operation with "manual programme and anti-frost mode", if instead the contacts are open the temperature is checked with one of the seven automatic programs available. When you are at home, the timer thermostat-operating mode is checked by means of a control device of the Automation system, configured to manage the actuator mentioned above.
|
|
By managing air conditioning:
- comfort levels can be optimized by adapting the indoor temperature of the home to weather conditions and lifestyles;
- energy can be saved: one degree too much represents nearly 7% more consumption.
Whatever the type of heating system – electric, gas, fuel oil or heat pump – Delta Dore offers accurate, communicating regulation and programming solutions. Room thermostats, programmable thermostats, programmers, load controllers, consumption meters… all can be new sources of savings.
|
|
The Room Control for TP/FT-10 LonWorks® networks is a product oriented to control the complete HVAC of a room, office or site. It has all the functions needed to work in stand alone mode or under a LonWorks® distributed control network to be integrated in building automation solutions.
- Power supply: 24Vac/50Hz, 24Vdc
- Media: TP/FT-10
- Digital inputs: 2
- Universal inputs: 1
- Relay outputs: 5
- Blue backlight Display LCD
|
|
Tebis TX uses the technology of the installation bus for the control of lighting, heating and roller-shutters or other similar loads, in both residential and commercial applications.
Consumer expectations for increased control of lighting, security and heating continue to rise. Tebis TX offers simple solutions allowing installations to offer benefits that a traditional electrical installation cannot provide.
Tebis TX respects usual installation habits. Electrical contractors can continue to use familiar materials and gain precious time in planning, then wiring, as there is only one cable connecting each push button to the next. Right up to - and after - completion of wiring, you can choose which switch controls which light : the building user can decide at the last minute, or
change their mind at any time in the future with minimum fuss.
|
|
Wish: to save energy by minutant heating.
Report
You wish to have a pleasant temperature in all the house. For this purpose, you must adjust the thermostat of each radiator to the hand. Moreover, a latency ago before the desired temperature is not reached.
The solution Schneider Electric
With KNX, the thermostat of your radiators is regulated itself. It is you who decide where, when and on which temperature. You can thus heat the parts individually, according to your rhythm of life. The morning, for example, a timer starts the heating of the room to be laid down, the bathroom and the kitchen. When you return to the house the evening, the heating of the living room is also put in step. It is not a luxury, it is a pleasant comfort and a manner simple to make savings in heating.
|
|
|
|
|
|
Comfort, Control, Common Sense.
Control heating and cooling comfort where you want it, when you want it. With a Honeywell Zoning System, you won't heat empty rooms or over-cool one area in order to be comfortable in another. Zoning makes it possible for everyone to be comfortable.
You don't have to buy a new heating and cooling system for every room. A Honeywell Zoning System uses dampers in your ductwork that open and close as needed based on each zone's thermostat settings. When a zone is at the selected temperature, and doesn't need to be heated or cooled, the dampers close to save energy and maximize comfort elsewhere. Think of it as controlling your heating and cooling the same way you control your lights - a thermostat controls each zone to the temperature you choose.
Key Features:
- Meets American Lung Association® Health House® guidelines.
- Increased comfort. No more rooms that are too hot or too cold.
- Energy-efficient. Heat or cool only the areas you want, so you'll save energy.
- 5-year warranty.
|
|
|
|
|
|
Comfort, Control, Common Sense.
Control heating and cooling comfort where you want it, when you want it. With a Honeywell Zoning System, you won't heat empty rooms or over-cool one area in order to be comfortable in another. Zoning makes it possible for everyone to be comfortable.
You don't have to buy a new heating and cooling system for every room. A Honeywell Zoning System uses dampers in your ductwork that open and close as needed based on each zone's thermostat settings. When a zone is at the selected temperature, and doesn't need to be heated or cooled, the dampers close to save energy and maximize comfort elsewhere. Think of it as controlling your heating and cooling the same way you control your lights - a thermostat controls each zone to the temperature you choose.
Key Features
Meets American Lung Association® Health House® guidelines.
Increased comfort. No more rooms that are too hot or too cold.
Energy-efficient. Heat or cool only the areas you want, so you'll save energy.
5-year warranty.
|
|
Humidistat
The relative humidity is a decisive factor for a healthy room climate. JUNG hydrostats regulate the humidity, thereby preventing damage from mould and mildew.
|
|
This precision chronothermostat detects temperature and watch. It carries a blue 4 digits head-on that directly displays the temperature detected and alternatively shows the time.
It can be integrated in the Hohner domotic system and put on a 503 box on bTicino and Vimar brace - cover plate not included.
|
|
The programmable room thermostat has ON/OFF operation and allows the householder to set the desired temperature and boiler operating times via a large digital display. This gives complete control of the heating system.
In addition, the thermostat can be used to turn the boiler OFF or to set it to continuous operation i.e. on all day and night. At night the temperature can be reduced to improve efficiency (night time set back).
When installing a new, replacement or upgraded central heating system a room thermostat is a mandatory requirement under Part L of the Building Regulations.
|
|
|
The HP digital programmable thermostat is a stylish, compact programmable room control. It has all the standard features of the digital room thermostat with the added advantage of user adjustable start times and temperature levels over a 7 day period. This gives the occupant total control over the heating system increasing comfort and reducing energy consumption.
|
|
|
Room temperature control in surface design, adjustable operating range from 5 - 30°C, colour: white, also available as 230V-design
|
|
- Wall-mounted programmable thermostat
- Power supply: battery-operated
- Daily or weekly programming
- Timer-controlled temperature override from 15 minutes to 72 hours
- An absence of 1 to 365 days can be programmed - Continuous override function using the selector switch
- Programs and settings lock
- Room temperature reading
- Circulator anti-seizing function
- Sensor calibration
|
|
- By using a digital regulator it is possible to make correction of temperature in range +3/-3°C in a particular heating/cooling circuit.
- Display together with 4 buttons enable setting required temperature and change mode heating/cooling of the particular circuit.
- Circuit heating/cooling is connected to thermo-regulator by program INELS Designer and Manager (IDM).
- IN-built temperature sensor serves to measure ambient temperature.
- Active back-light ensures good readability of the display.
|
|
- Digital weekly room thermostat clock with modern design and large, easy-to-read display
- Available in 3 modern colors: White, Anthracite, Silver
- Up to 48 different time & temperature “events” per day to create a comfortable environment all day long; 4 pre-set programs & 1 user defined program available
- Various running modes to select from depending on the situation: AUTO, Override, ECO-FIX, Cleaning, Countdown, Party, Holiday and OFF
|
|
|
|
Home automation systems: energy management, heating
