Gray cladding

The top-quality real anodised series comes in matt or brushed finishes with a colour spectrum ranging from natural anodised to gold, and from copper to darker tones. Time enhances the anodised surfaces: as they gain depth and become more ...

Different lighting and viewing angles highlight the typical metallic gloss of these colours. The different appearance of colour and gloss under various light conditions and viewing angles gives these surfaces a vivid impression and brings ...

Brilliant, iridescent colours found in nature were the inspiration for Spectra colours. Through special colour pigments, various colour gradients of gloss and depth are created. Depending on the type of pigment and viewing angle, enchanting ...

... Naturali series in terms of colours, textures and slab processing methods make it extremely versatile, suitable for wall cladding, flooring, exterior façades and decorative surfaces such as kitchen countertops, table ...

... well-balanced series with endless application possibilities. Its extremely visual texture makes it perfect both for the exterior cladding of buildings, as well as to enhance the value of the surfaces in an apartment. All ...

... volumes. Owing to its characteristics, this line is perfect not just for large outdoor surfaces, but also for creating and cladding interior furnishings, where it proves to be a precious ally in enhancing the interiors The ...

Extruded aluminium profile for light duty with a 33.3 mm pitch. Normally used for smaller surface areas, round and special shapes. Materials Aluminium extrusion, alloy EN AW 6063 T66 Finish - Anodised (20 micron) - Polyester ...

Heavy-duty extruded aluminium profile at 50 mm pitch with very high air flow. Applications Often to be found where the blade pitch reflects the aesthetics of the overall project design. Available as doors, shapes and circles. Materials Aluminium ...

Extruded aluminium profile with a pitch of 60 mm and perforated back; maximum blade length of 6,000 mm. Blades packed with inorganic mineral wool for acoustic performance. Developed to provide an aesthetic solution for noise reducing ...

The sturdy panels, only 13 mm thin, open up a great freedom for the design of individual facades. Concrete skin pulls smoothly over buildings, corners and edges like a skin and creates a unique material flow.

facade made of glassfibre reinforced concrete / concrete / panels / sandblasted

The development of glassfibre reinforced concrete was inspired by Rieder’s vision of a concrete cladding panel that is both stable and lightweight. The aesthetic panels with only 13 mm thickness in various colours, surfaces ...

Baïne is a cladding siding with symetrical waves ( sinusoidal) done by bending. Baïne is usable for facade and over-roofing as vertical or horizontal installation with visible fixing. Used as wall cladding, ...

Mascaret® is a perforated cladding system with 4 wavy shapes. Different perforation are available. Mascaret® is specially well-adapted for sun screen and transparent facade. Its specific perforations create a transparency ...

... 300 mm (other on request) Perforation on request Chaotic® is a rainscreen cladding made of coated steel sheets with thickness of 1mm This claddings are mounted as rainscreen cladding ...

Country / Place: - - CH/Salmsach Name of Project: - - Neuteerbit Salmsach Product Category: - - Back-ventilated Facades Material: - - CELLON®, 8mm Colour: - - NCS S 7500-N, Writing, Logo: RAL 1023, RAL 6037, RAL 3020, RAL 9016 Architect ...

Country/Place: - - DE/Öhningen Name of Project: - - EFH Öhningen Product Category: - - Facade Cladding Material: - - Cellon 8mm (Part Perforation 50100) Colour: - - DB 703 Architecture: - - Benjamin Heller, ...

... Place: - - CH/Switzerland Name of Project: - - Multiple Dwelling Seestrasse 108 Kilchberg Product Category: - - Balcony Claddings, Plain and Perforated Facade Material: - - CELLON 8; 10mm Perforation: - - Customer ...

Length: 675 mm
Height: 150 mm
Thickness: 21 mm - 45 mm

... Yep, Barrow can take a hit or two from Mother Earth. Those who do use it for the outdoors will be awarded a beautiful silver-gray colour. In a word: weathered.

Length: 966 mm
Height: 47 mm
Thickness: 0.6 mm - 1.2 mm

Europerfil KEOPS architectural metal profile (7.138.47). CE marking (EN 14782). Nerve height 47 mm, useful width 966mm, and thickness from 0,6 mm to 1,20 mm. Galvanised and pre-lacquered steel ( EN 10169) in standard Europerfil colours ...

Length: 400 mm
Height: 85 mm
Thickness: 0.7 mm - 1.2 mm

Europerfil GIZA architectural metal profile (1.400.85). Nerve height 85 mm, useful width 400mm, and thickness from 0.75 mm to 1.20 mm. Galvanised and pre-lacquered steel (EN 10169) in standard Europerfil colours and coatings. CE marking ...

Length: 1,010 mm
Height: 44 mm
Thickness: 0.8 mm - 1.2 mm

Europerfil ATENEA architectural metal profile (5.202.44). Nerve height 44 mm, useful width 1010 mm, and thickness from 0.75 mm to 1.20 mm. Galvanised and pre-lacquered steel (EN 10169) in standard Europerfil colours and coatings. CE marking ...

Length: 1,100 mm - 7,500 mm
Thickness: 0.75 mm

Among the dreams of the architect, the correct mastery of randomness is one of the supreme exercises. Playing with sobriety, composing your own rhythm with finesse, to obtain a subtle singularity, with the assurance of a result of discreet ...

Length: 1,100 mm - 7,500 mm
Thickness: 0.75 mm

Among the dreams of the architect, the correct mastery of randomness is one of the supreme exercises. Playing with sobriety, composing your own rhythm with finesse, to obtain a subtle singularity, with the assurance of a result of discreet ...

Length: 20 cm - 800 cm
Thickness: 0.75 mm

Like the famous skyline, the NEW YORK range plays for the first time on the depths of the veins and lets the shadows work. Very visual, the profiles offer three very different signatures and above all know how to mix ad infinitum. REGISTERED ...

Length: 60 cm
Height: 30 cm
Thickness: 7.7 mm

... modernity. The CUPACLAD® 201 VANGUARD rainscreen cladding system stands out due to its stainless steel clips, which are slightly visible at the bottom, contrasting with our natural slate. The result is sustainable ...

Thickness: 8 mm

... systems with invisible fixings that make our natural slate the main attraction of a facade. The CUPACLAD® 101 LOGIC rainscreen cladding system gives any facade balance, combines ideally with other materials and flaunts ...

Length: 50 cm
Height: 15, 25, 20 cm
Thickness: 8 mm

... systems with invisible fixings that make our natural slate the main attraction of a facade. Our CUPACLAD® 101 RANDOM rainscreen cladding system is synonymous with creativity and gives any facade an original design ...

... remarkable and durable wood appearance Wood cladding: warm but too expensive to maintain? The solution is WEO® composite cladding! Developed with the latest extrusion technologies, WEO® composite ...

Length: 17 cm
Thickness: 33 mm

-Water-Resistant Facade Cladding With A Real Wood Look: Wood cladding : warm but too expensive to maintain? The solution is WEO composite cladding!WEO cladding boards ...

Length: 3,600 mm
Height: 173 mm
Thickness: 13 mm

WEO Classic – Composite cladding Amazing composite cladding looks like wood ! Know everything -Unique design - looks like tropical wood -Colour Guaranteed for 20 years -Multi-chromatic colours ...

Length: 600 cm - 1,500 cm
Height: 155 cm - 800 cm
Thickness: 15 mm - 100 mm

One of our best stone for external cladding. Semi Rijo LR is a very good choice for your wall cladding and cut to size projects and facades.

Length: 30 cm - 60 cm
Height: 30 cm - 60 cm
Thickness: 20, 30, 40 mm

Lusorochas presents its line REV’ PROJECT, a line of façades and wall cladding in natural stone. The most natural option for façades for several projects (residentials, commercials, hospitality, etc), natural stone is ...

Blue stone Valverde is a very good choice for your facades and external cladding. Other names: Azul Obidos, Azul Atlantico. Any finishing is available. Contact Lusorochas' team for more information : www.lusorochas.com

The SMARTIA Cladding system consists of numerous profiles and fittings which offer the necessary aluminium subframe to support various exterior covering plates made of materials like: Fired earth tiles of different ...

Length: 1,250 mm - 6,000 mm
Height: 990 mm
Thickness: 0.6 mm - 1.5 mm

... designed by TAS. The profile Mallorca stands out for its peaky finish and its different modulation options. Conceived for cladding of façades, it can be installed either vertically or horizontally and it can be manufactured ...

Length: 1,250 mm - 6,000 mm
Height: 450, 680, 880 mm
Thickness: 0.6 mm - 1.5 mm

... The profile Dragonera is formed by three different parts or "scales" which are installed overlapping. Conceived for cladding of façades, it can be installed either vertically or horizontally and it requires an ...

Length: 1,250 mm - 6,000 mm
Height: 958 mm
Thickness: 0.6 mm - 1.5 mm

... asymmetrical geometry. Each profile contains more than 20 folds with a wide range of angles that make it a unique solution for cladding facades on the market. The Cabrera profile can be installed both horizontally ...

Length: 1,220 cm
Height: 2,440 cm
Thickness: 8 mm

DEBO HUWAI-HPL Compact Exterior Nature Wood, inspired by the natural forest, combines solid wood veneer and Compact HPL to form an integrated decorative material. It’s texture is extended and undulating, alternating light and dark colors ...

Length: 1,530, 1,830, 1,220 mm
Height: 3,660, 2,440, 3,050 mm
Thickness: 6, 8, 4, 10, 12 mm

... It is different from solid wood, marble, glass such traditional outdoors materials. It is ideal for modern building facade cladding, balcony, exterior furniture and exterior product assortment. Renovation The core ...

Length: 2,440 mm
Height: 1,220 mm
Thickness: 2, 4, 6, 8, 12 mm

... It is different from solid wood, marble, glass such traditional outdoors materials. It is ideal for modern building facade cladding, balcony, exterior furniture and exterior product assortment. Renovation The core ...

Length: 795, 292, 395, 1,195, 595 mm
Height: 2,995, 3,495 mm
Thickness: 6 mm

We have launched a completely new colour collection, developed in collaboration with Scandinavia's leading experts in colour and architecture. Re:Colour is about safeguarding place identities and good use of colour in urban areas. Bring ...

Length: 910, 1,195 mm
Height: 3,200, 850 mm
Thickness: 6 mm

Steni Vision panels are made of stone composite and can be used both internally and externally with all kinds of buildings. Create your unique look with Steni Vision façade panels With the Steni Vision 6 mm façade panels, we give ...

Length: 595, 395, 795, 295, 1,195 mm
Height: 3, 1, 850, 2,995 mm
Thickness: 6 mm - 14 mm

... different grades of coarseness: fine micro, fine, medium, coarse (From 6 to 14mm). The panels are installed as ventilated cladding and can be installed at any time of year, irrespective of the temperature and weather. ...

Length: 2,000, 3,000 mm
Height: 1,250, 1,330, 500, 1,000 mm
Thickness: 0.7 mm - 1.5 mm

The perforated zinc façade is an exterior cladding that offers numerous functional and decorative advantages. Thanks to the intrinsic properties of the material, the wide range of elZinc finishes and the numerous perforation ...