Brown cladding

... Naturali series in terms of colours, textures and slab processing methods make it extremely versatile, suitable for wall cladding, flooring, exterior façades and decorative surfaces such as kitchen countertops, table ...

... well-balanced series with endless application possibilities. Its extremely visual texture makes it perfect both for the exterior cladding of buildings, as well as to enhance the value of the surfaces in an apartment. All ...

... volumes. Owing to its characteristics, this line is perfect not just for large outdoor surfaces, but also for creating and cladding interior furnishings, where it proves to be a precious ally in enhancing the interiors The ...

Finishing façades or façade elements to create a sleek and uniform look using a variety of vertical profiles: that's what Linarte was designed for. By combining profiles as you wish and adding in countless accessories, you get to create ...

Length: 63 cm - 140 cm
Thickness: 15 mm

The linear wall system is also suitable for curved or arched applications. These can be applications in which the walls are curved or where they flow smoothly into the ceilings. The architect's creativity is the guiding principle and ...

facade made of glassfibre reinforced concrete / concrete / panels / sandblasted

Length: 1,310 mm - 1,510 mm
Height: 5,000 mm
Thickness: 13 mm

Large-format panels: The elements made of glassfibre reinforced concrete with a thickness of only 13 mm in various colours, surfaces and shapes open up great freedom for the design of individual facades. concrete skin withstands extreme ...

Fitting with current trends and developments, Rieder offers a range of additional processes for the creation of individual building envelopes. In collaboration with planners and architects, new textures were developed. The slate texture ...

... subtle rapprochement to real metals without its inconvenients creating a refi ned metallic look. Both series are the ultimate cladding solution for achieving the sophisticated tone that your architectural vision demands. ...

ALUCOBOND® terra unites the typical crystalline surface and velvety feel found in natural stone with many of the advantages of ALUCOBOND® composite panels. Unlike most natural stone, ALUCOBOND® composite panels are both very thin and ...

Length: 5,000 mm
Height: 1,500 mm

ALUCOBOND® legno composite panels are real natural beauties: five different wood look finishes showcase wood at its most exclusive and a special coating adds a grainy structured feel to the surface. It makes the lively wood decors even ...

Baïne is a cladding siding with symetrical waves ( sinusoidal) done by bending. Baïne is usable for facade and over-roofing as vertical or horizontal installation with visible fixing. Used as wall cladding, ...

... 300 mm (other on request) Perforation on request Chaotic® is a rainscreen cladding made of coated steel sheets with thickness of 1mm This claddings are mounted as rainscreen cladding ...

Pearl, prepainted galvanized steel of a 60μm thick PVDF fluoridated thermoplastic multilayer paint applied at high temperature. Pearl offers pearly hues for a play of light and colors. The facade seems to change color according to the ...

EXPERIENCE WALL represents a true revolution in façade coatings. It converts steel, a fully recyclable material, best known for its industrial use, into facade finishes of high aesthetic and architectural value for all types of buildings ...

Casello Villesse – Italy DATE: LOCATION:ITALY, Villesse TYPOLOGY :Public / Institutional APPLICATIONS:Cladding PRODUCT: Wall to wall outdoor cladding It is an innovative wall covering profile ...

DATE: LOCATION: ITALY, Milano TYPOLOGY: Commercial / Parking / Offices APPLICATIONS: Cladding PRODUCT: WALL TO WALL cladding ARCHITECTS: Della Fontana, STUDIO D2U It is an innovative wall covering ...

Centro del Jubilado – Spain DATE: LOCATION:SPAIN, Valladolid TYPOLOGY :Public / Institutional APPLICATIONS:Cladding PRODUCT:WALL TO WALL It is an innovative wall covering profile that allows to transfer the warmth and ...

Uniquely Customisable One of the biggest advantages of Bruag's perforated panel facade is the high customisability of the individual tiles, used to plan and realise unique buildings of any kind. There is no limit shapes, sizes and cut-outs. ...

Length: 675 mm
Height: 150 mm
Thickness: 21 mm - 45 mm

Barrow is made from reclaimed hardwoods from Kalimantan. It’s our first line suitable for outdoor spaces. Yep, Barrow can take a hit or two from Mother Earth. Those who do use it for the outdoors will be awarded a beautiful silver-gray ...

Length: 1,100 mm - 7,500 mm
Thickness: 0.75 mm

Among the dreams of the architect, the correct mastery of randomness is one of the supreme exercises. Playing with sobriety, composing your own rhythm with finesse, to obtain a subtle singularity, with the assurance of a result of discreet ...

Length: 1,100 mm - 7,500 mm
Thickness: 0.75 mm

Among the dreams of the architect, the correct mastery of randomness is one of the supreme exercises. Playing with sobriety, composing your own rhythm with finesse, to obtain a subtle singularity, with the assurance of a result of discreet ...

Length: 20 cm - 800 cm
Thickness: 0.75 mm

Like the famous skyline, the NEW YORK range plays for the first time on the depths of the veins and lets the shadows work. Very visual, the profiles offer three very different signatures and above all know how to mix ad infinitum. REGISTERED ...

Length: 530, 230 cm
Height: 148 mm
Thickness: 21 mm

Kebony Character products are produced from FSC® certified Scots Pine modified with a bio-based liquid. The patented Kebony technology permanently alters the wood cell structure to give a unique wood product with outstanding durability ...

Length: 230, 530 cm
Height: 98 mm
Thickness: 21 mm

Kebony Character products are produced from FSC® certified Scots Pine modified with a bio-based liquid. The patented Kebony technology permanently alters the wood cell structure to give a unique wood product with outstanding durability ...

Length: 390, 450 cm
Height: 73 mm
Thickness: 21 mm

Kebony Character products are produced from FSC® certified Scots Pine modified with a bio-based liquid. The patented Kebony technology permanently alters the wood cell structure to give a unique wood product with outstanding durability ...

Length: 2,500, 4,000, 3,000, 3,500, 2,000 mm
Height: 300 mm
Thickness: 28.5 mm

A range of bio-sourced cladding products with CSTB Technical Approval, based on patented technology with a high content of recycled wood fibres. An ingenious combination of plants and minerals for a durable, resistant ...

Length: 4,000, 3,000, 2,500, 3,500, 2,000 mm
Height: 300 mm
Thickness: 28.5 mm

A range of bio-sourced cladding products with CSTB Technical Approval, based on patented technology with a high content of recycled wood fibres. An ingenious combination of plants and minerals for a durable, hard-wearing ...

Length: 2,500, 3,500, 3,000, 2,000, 4,000 mm
Height: 300 mm
Thickness: 19.5 mm

A range of bio-sourced cladding products with CSTB Technical Approval, based on patented technology with a high content of recycled wood fibres. An ingenious combination of plants and minerals for a hard-wearing, durable ...

Length: 225 mm - 250 mm
Height: 4,000 cm - 4,000 cm
Thickness: 1 mm - 1 mm

With modern perforation technology, perforated elZinc® façades can be taken to the next level by introducing patterns over the panels. In this way, all the advantages of elZinc standard perforated panels are combined with designs that ...

Length: 1,000 mm - 1,250 mm
Height: 0 mm - 6,000 mm

By using special software that takes images and converts them into patterns of perforations of different densities and sizes the architect can ‘draw’ over the entire facade, converting it into something completely unique. Possibilities ...

Length: 1,000 mm
Height: 2,000 mm
Thickness: 0.7, 1, 0.8 mm

... combines the elegance of zinc with the richness of colour. Available in 6 subtle shades: red, blue, green, black, gold and brown, they harmoniously integrate into their surroundings. Rolled according to the European ...

Length: 30 cm - 60 cm
Height: 30 cm - 60 cm
Thickness: 20, 30, 40 mm

Lusorochas presents its line REV’ PROJECT, a line of façades and wall cladding in natural stone. The most natural option for façades for several projects (residentials, commercials, hospitality, etc), natural stone is ...

The system is specially designed for mounting etalbond cassettes. Offers: • Optimal solution for large and flat façades • Assuring easy, fast and secure mounting of the composite panel etalbond® • Optimal behaviour to the thermal ...

Length: 3, 4 m
Thickness: 33 mm

... remarkable and durable wood appearance Wood cladding: warm but too expensive to maintain? The solution is WEO® composite cladding! Developed with the latest extrusion technologies, WEO® composite ...

Length: 17 cm
Thickness: 33 mm

-Water-Resistant Facade Cladding With A Real Wood Look: Wood cladding : warm but too expensive to maintain? The solution is WEO composite cladding!WEO cladding boards ...

Length: 12,200 mm
Height: 24,400 mm
Thickness: 2 mm - 25 mm

DEBO HUWAI-HPL Compact Exterior Nature Wood, inspired by the natural forest, combines solid wood veneer and Compact HPL to form an integrated decorative material. It’s texture is extended and undulating, alternating light and dark colors ...

Length: 1,220 cm
Height: 2,440 cm
Thickness: 8 mm

DEBO HUWAI-HPL Compact Exterior Nature Wood, inspired by the natural forest, combines solid wood veneer and Compact HPL to form an integrated decorative material. It’s texture is extended and undulating, alternating light and dark colors ...

Length: 2,440 mm
Height: 1,220 mm
Thickness: 2, 4, 6, 8, 12 mm

DEBO HUWAI-HPL Compact Exterior Nature Wood, inspired by the natural forest, combines solid wood veneer and Compact HPL to form an integrated decorative material. It’s texture is extended and undulating, alternating light and dark colors ...

Length: 1,250 mm - 6,000 mm
Height: 990 mm
Thickness: 0.6 mm - 1.5 mm

... designed by TAS. The profile Mallorca stands out for its peaky finish and its different modulation options. Conceived for cladding of façades, it can be installed either vertically or horizontally and it can be manufactured ...

Length: 1,250 mm - 6,000 mm
Height: 450, 680, 880 mm
Thickness: 0.6 mm - 1.5 mm

... The profile Dragonera is formed by three different parts or "scales" which are installed overlapping. Conceived for cladding of façades, it can be installed either vertically or horizontally and it requires an ...

Length: 1,250 mm - 6,000 mm
Height: 958 mm
Thickness: 0.6 mm - 1.5 mm

... asymmetrical geometry. Each profile contains more than 20 folds with a wide range of angles that make it a unique solution for cladding facades on the market. The Cabrera profile can be installed both horizontally ...

Length: 795, 292, 395, 1,195, 595 mm
Height: 2,995, 3,495 mm
Thickness: 6 mm

We have launched a completely new colour collection, developed in collaboration with Scandinavia's leading experts in colour and architecture. Re:Colour is about safeguarding place identities and good use of colour in urban areas. Bring ...

Length: 910, 1,195 mm
Height: 3,200, 850 mm
Thickness: 6 mm

Steni Vision panels are made of stone composite and can be used both internally and externally with all kinds of buildings. Create your unique look with Steni Vision façade panels With the Steni Vision 6 mm façade panels, we give ...

Length: 595, 395, 795, 295, 1,195 mm
Height: 3, 1, 850, 2,995 mm
Thickness: 6 mm - 14 mm

... different grades of coarseness: fine micro, fine, medium, coarse (From 6 to 14mm). The panels are installed as ventilated cladding and can be installed at any time of year, irrespective of the temperature and weather. ...

Length: 1,500 mm
Height: 400, 500, 250, 300, 200 mm
Thickness: 20 mm

Visual strength with high performance Extruded tile with symmetrical joint design that allows flexibility in installation. Together with the possibility of wavy and flat exterior finishes, it generates volume along with contrast of lights ...

Length: 1,500 mm
Height: 400, 500, 300, 250, 200 mm
Thickness: 20 mm

Visual strength with high performance Extruded tile with symmetrical joint design that allows flexibility in installation. Together with the possibility of wavy and flat exterior finishes, it generates volume along with contrast of lights ...

Length: 1,500 mm
Height: 200, 250, 300, 400, 500 mm
Thickness: 20 mm

Visual strength with high performance Extruded tile with symmetrical joint design that allows flexibility in installation. Together with the possibility of wavy and flat exterior finishes, it generates volume along with contrast of lights ...

Length: 455 cm
Height: 1,818 cm

The name says vintage, but thats open to interpretation. VintageWoods warm wood tones and deep texture works as well in modern setting as it does retro. Its ability to be installed running vertically or horizontally gives this performer ...