Thermal conductivity: 0.035 W/(m.K)
Thickness: 4 mm - 80 mm
... they are ready to be tiled, rendered or plastered. Their excellent thermal insulation properties make them ideal for use as effective thermal insulation. The construction boards are perfectly suited for ...
Jackon Insulation
Thermal conductivity: 0.035 W/(m.K)
Thermal resistance: 1.4, 2.25 m²K/W
Thickness: 50, 80 mm
URSA France
Thermal conductivity: 0.05 W/(m.K)
Thermal resistance: 0.2, 0.24, 0.38 m²K/W
Length: 2,500 mm
... strength High heat protection during summer months Excellent insulation qualities Water vapour open Reduced short-term moisture absorption Easy to handle Suitable as insulation board for mastic ...
STEICO
Thermal conductivity: 0.024 W/(m.K)
Thermal resistance: 2.7 m²K/W - 5.45 m²K/W
Thickness: 60 mm - 120 mm
... Thermal Insulation-F is a high performance foil faced insulation board specifically designed for use with single ply EPDM membranes RESITRIX® and HERTALAN®, in both new build and refurbishment applications. This ...
Thermal conductivity: 0.039 W/(m.K)
Thickness: 40 mm - 200 mm
... Moisture-resistant insulation board Sheathing directly over timber frame constructions, over wood sheathing and over masonry under the facing in vented facade constructions Full boards install under ...
GUTEX
Thermal conductivity: 0.042 W/(m.K)
Thermal resistance: 0.45 m²K/W - 3.8 m²K/W
Length: 1,900 mm
isonat
Thermal conductivity: 0.023 W/(m.K)
Thickness: 3 cm - 12 cm
... POLYSOL IP 35 PLUS is an insulating system obtained through the hot bonding of a smooth or mineralcoated plastomeric waterproofing membrane reinforced with glass fibre non-woven polyester fabric to sheets of foam PUR/PIR rigid ...
Polyglass Spa
Thermal conductivity: 0.028, 0.025 W/(m.K)
Thermal resistance: 1.05 m²K/W - 6.4 m²K/W
Thickness: 30 mm - 160 mm
... POLIISO® SB is a yellow thermal insulation panel made of rigid, closed-cell PIR foam, expanded between two supports: the top one is made of bituminized glass fiber and the bottom one of saturated glass ...
Ediltec
... under-tile thermal insulation system for pitched roofs, developed for refurbishment interventions and new roofing. It involves laying modular structural panels, light and consisting of an insulating ...
BRIANZA PLASTICA
Thickness: 25 mm - 100 mm
... SilveRboard Rigid Foam Insulation is a high performance flat-sheet insulation material made from Expanded Polystyrene (EPS) which is coated with a layer reflective lamination on both sides. This highly ...
amvicsystem
... commercial roofing system. DensDeck Prime can mitigate the risk from fire, foot traffic, and hail damage, helping to add lifespan to the roofing system. DensDeck panels’ superior dimensional stability ...
Thermal conductivity: 0.05 W/(m.K) - 0.27 W/(m.K)
... application requirements. Features • Rigid, self-supporting, fibre insulating board • Very low thermal conductivity • Opportunity to reduce backup insulation thickness up to 50% ...
Morgan Advanced Materials
Thermal conductivity: 0.039, 0.048, 0.038, 0.05 W/(m.K)
Length: 130 cm
Width: 79 cm
... The insulation board with integrated levelling compensation. Suitable for direct rendering. UdiRECO wood-fibre insulation boards are suitable for direct rendering, have optimized lambda ...
Length: 1,000 mm
Width: 500 mm
Thickness: 40 mm
AME DU LIEGE
... vinyPur high performance insulation with integrated substructure and rear ventilation. The new façade insulation panel made of high performance insulating material PUR/PIR rigid ...
Thickness: 98, 87, 61 mm
... conservatory market offering innovative and technical solutions in order to answer different issues. NOVATOIT® includes all the panels from the scope of the conservatory having a constant need for technical solutions to improve the thermal ...
... AIRDACH is an insulating and ventilated panel for the roof in tiles, produced in polystyrene foam EPS, according to the norm EN 13163, self-extinguishable, reaction to fire class E according to the European norm EN 13501/1, ...
RE.PACK Srl
... CIRFIBER is a polyester fibre panel made from 100% new polymers processed by fibre thermo-binding. ...
Thermal conductivity: 0.038 W/(m.K)
Thickness: 60 mm - 150 mm
GUITTET
Thermal resistance: 3.05, 3.45, 3.9, 4.35 m²K/W
Thickness: 70, 80, 90, 100 mm
... waterproofing solution and insulation, is recommended. SOMDRAIN® RT5 is applied vertically in contact with buried structure walls : residential, business or industrial premises. It simultaneously ensures the protection and thermal ...
Thermal conductivity: 0.053 W/(m.K)
Length: 2,500 mm
Width: 1,200 mm
Thermal conductivity: 0.039 W/(m.K)
Length: 1,000 mm
Width: 100 mm
... protection of openings between floors and curtain walls. Technical Features The product consists of a semi- rigid non-combustible panel with oriented fibres, treated on both sides with a white ablative coating. With ...
Thickness: 25 mm - 120 mm
IBS Distribution
... Highlights: Quick and easy fitting. The easy fitting results in considerable savings in hire costs. High acoustic insulation at a very low cost. APPLICATIONS Soundproofing for rooms, floors, walls and ceilings. Interior lining ...
... The B-Hygienic FRP sheet is a laminated glass fi ber reinforced polyester sheet, opaque, available with a smooth or embossed surface. The B-Hygienic FRP sheet is the basis for the products Insupanel, Renopanel, HygiCeil and HygiWall. Hygienic protection ...
B-Hygienic
the best suppliers