Cone-head injection packer 50069

steel

Steel wedge packer with steel cone nipple M5 for crack repair. The minimum crack width is 1.5 mm. Steel wedge packer with screwed-in steel cone nipple M5 DIN 71412 with check valve for crack repair. The minimum crack width is 1.5 mm. The steel wedge packer is driven directly into the crack, thus eliminating the need for drilling into the masonry and is therefore suitable for materials and components where drilling is not possible. Wedge packers can be used for crack injection in all common building materials such as concrete, granite, hollow block, brick, sandstone. It is suitable for the injection of epoxy resin, polyurethane resin as well as micro cement suspension. It is also very suitable for pressure impregnation of wood preservatives or for wood consolidation with epoxy resin. In this case, the wedge packers are driven directly into the wood. After injection, the packer can be removed again. Maximum injection pressure up to 50 bar with tight fit of the wedge packer. Dimensions: Length: 25 mm Internal thread: M5