Protection waterproofing membrane BETAGUM P

for foundationfor bridge constructionroll

BETAGUM P is an SBS (Styrene Butadiene Styrene) polymer modified membrane. The reinforcement is a composite polyester. It is used on civil and industrial decks subjected to mechanical stresses, tensile structure, metal deckings, pre-fabricated decks and/or with cold climates. BETAGUM P is an elastomeric type membrane, obtained from distilled bitumen modified with elastomeric (SBS). BETAGUM P is reinforced with a “non woven” polyester composite fabric, stabilized with a fiberglass mat. Mineral versions differ only by having a surface finish of slate chips. USES BETAGUM P waterproofing membrane and cap sheet for use in applications on various roof types, whether they are insulated or not, especially those subjected to high levels of stress such as tensile structures or metal profile decks. Ideal also for use in cold climate BETAGUM P MINERAL waterproofing membrane and finish/top sheet for use in multi-layer applications on various roof types, whether they are insulated or not especially those which are subject to high levels of stress such as tensile structures or metal profile decks, and for use in cold climates. FINISHES Upper surface BETAGUM P membrane is available with sand, to ensure that the rolls unwind correctly. BETAGUM P MINERAL membranes are covered by natural grey slate chips. A 8 cm wide strip is left free mineral chips to form overlap joint. This area, as in underside of the membrane, is protected by the application of polyethylene torch off heat sensitive film.