*myarchiexpo

Stone drainage channel CANIVEAU CC2
paving

Add to favorites

Compare this product

Characteristics

Material

stone

Applications

paving

Length

500 mm
(20 in)

Width

500 mm
(20 in)

Depth

Max.: 135 mm
(5.31 in)

Min.: 110 mm
(4.33 in)

Description

Sales unit

Geometric characteristics

Installation

The indications given by standard NF P 98 335 and CCTG booklet 29 take precedence.
Installation should be carried out between +5°C and +30°C on a sound substrate.
Mortars are prepared or supplied as the work progresses.
The mortar bed is levelled with a straightedge and executed in sequence. Its thickness should be as uniform as possible (~4 cm).
Panels must be moistened, especially in hot conditions.
During installation, blend products of different colours/shades coming from different batches.
Joints are provided between the slabs. Joints are filled with mortar no sooner than 24 h after laying and no later than 72 h after laying.
Joint width should be as small as possible without being less than 5 mm.
Immediately after jointing, the surface must be cleaned to avoid any film or deposit on the slabs.
Movement joints must be provided in accordance with regulatory requirements (10 linear metres or 20 m²).

Maintenance

Original colours are very stable; minimal maintenance is generally sufficient.
Applying a mineralising treatment will facilitate cleaning operations and extend the life of the original surface appearance.
High-pressure cleaners or acidic products are not recommended, as they can cause irreversible alterations.
De-icing salts should be used in reasonable quantities, avoiding excess stagnant residues.

Technical characteristics / specifications