Wall coating ECOFONDO® A+B+C

floorepoxyepoxy resin

Waterborne epoxy 3 component coating Waterborne 3 component product based on liquid epoxy resin with hydrolytic binders, to be used as primer for substrates even with humidity from ground-up. Description Three-component formulation based on water-based liquid epoxy resins and hydraulic binders, used as a base for surfaces, even wet and counterthrust, for the realization of breathable resinous cycles. Use Connecting layer and regularization of cement surfaces. Base layer for resinous floor coverings in the presence of damp substrates. Grouting of pitting and surface cracks. Primer for tile supports. Support The substrate must have a minimum compressive strength of 25 N/mm2 and a tensile strength of 1.5 N/mm2 . Preparation of the support The support must be properly cleaned manually and / or mechanically in order to eliminate non-cohesive parts, encrustations, efflorescence, dust and grease. Flooring must be treated mechanically, by sanding, shot peening or milling. Surfaces tending to flour should be treated in advance with a recovery of PAVIWATER T68 diluted 1:3 with water, proceeding with fresh ECOFONDO on fresh. Application Prepare the mixture of the 2 liquid components (A+B) by pouring the contents of part B into the container of part A; mix with a drill for about 2 minutes. Add the pre-dosed hydraulic binder to the mixture (A+B) and mix with a mixer drill for about 1 minute. To disperse the product optimally, it is necessary to pour the powders little by little, continuing to stir with the drill.