Tile primer PAVIWATER® TES A+B

for concretefor coatingsepoxy resin

Two component epoxy system, based on epoxy resin and amine in aqueous dispersion. The product comes with a high solids content: the viscosity. It can be lowered significantly by diluting with water. The film that is obtained has good mechanical characteristics, good resistance to solvents and industrial atmosphere and discrete light resistance. Description Two-component water-base epoxy system, based on epoxy and amine resin. The product is supplied with a high content of solids: the viscosity can be significantly lowered by diluting with water. The film obtained has good mechanical characteristics, good resistance to solvents and industrial atmosphere and good resistance to light. Use Transparent finish on floors and cement products. Anti-dust impregnating agent. Protection of printed floors and transparent consolidation. Support The substrate must have a minimum compressive strength of 25 N/mm2 and a tensile strength of 1.5 N/mm2 Preparation of the support Concrete bottoms. They must be solid, dry (seasoned if newly built), leveled, absorbent, not polluted by oils, detergents, powders or other substances. Evaluate the most convenient type of mechanical preparation. A mechanical preparation by abrasivation or shot peening is the most recommended, but it is necessary to check how the surface is altered. Absorbent and unpolluted surfaces can be prepared with a simple cleaning or with washing and subsequent drying