Wall coating ECOFONDO® PLUS A+B+C

floorepoxyhydraulic

Waterborne epoxy 3 component coating Three-component water-based epoxy primer with high vapor barrier behaviour. Base coat for cover cement surfaces even in the presence of damp substrates. Withstands hydrostatic pressure up to 500 kPa. Excellent tile adhesion. Suitable for Radon barrier coatings. Description Three-component formulation based on water-based liquid epoxy resins and hydraulic binders, used as a base for surfaces, even wet and counterthrust, to obtain the vapor barrier effect for reverse hydrostatic pressure values of 250 kPa. Use Connecting layer and regularization of cement surfaces. Base layer for resinous floor coverings in the presence of damp substrates. Grouting of pitting and surface cracks. Primer for tile supports. Support The substrate must have a minimum compressive strength of 25 N/mm2 and a tensile strength of 1.5 N/mm2. Preparation of the support The support must be properly cleaned manually and / or mechanically in order to eliminate non-cohesive parts, encrustations, efflorescence, dust and grease. Flooring must be treated mechanically, by sanding, shot peening or milling. Surfaces tending to flour should be treated in advance with a recovery of PAVIWATER T68 diluted 1:3 with water, proceeding with fresh ECOFONDO PLUS on fresh. Application Prepare the mixture of the 2 liquid components (A+B) by pouring the contents of part B into the container of part A; mix with a drill for about 2 minutes. Add the pre-dosed hydraulic binder to the mixture (A+B) and mix with a mixer drill for about 1 minute. To disperse the product optimally, it is necessary to pour the powders little by little, continuing to stir with the drill.