Smoothing coating COLLÉRATISS
finishingjointingindoor

smoothing coating
smoothing coating
Add to favorites
Compare this product
 

Characteristics

Function
smoothing, finishing, jointing
Location
indoor
Type of support
for wall
Component
gypsum plaster
Finish
smooth
Ecological characteristics
European Eco-label
Capacity in Kg

25 kg
(55 lb)

Description

ADMITTED SURFACES On interior surfaces: joints, plasterboard, pre-cast slabs. Surfaces should be dry, clean and sound. ADVANTAGES • Highly versatile filler - bonding AND skimming. • Excellent adhesion - Excellent smoothing properties - Long usage time. • Airless, Bazooka and Manual application. • Easy to sand. MATERIAL • Airless pump (nozzles 527 to 531 and 627) pressure 140-150 bars. • Bazooka • Trowel • Coating knife COVERAGE Filling and levelling: approx. 400 g per linear metre for bonding and 1.5 kg - 2 kg/m² for smoothing/skimming. COVERING All types of paints and coatings Application With the Bazooka, fill the cartridge using the pump provided. With the Airless system, spray horizontally at 20 to 30 cm from the surface. Recommended tips 527 to 531, pressure 140-150 bar. After an initial vertical spray application along the plasterboard recesses, apply and compress the joint tape on the filler using a coating knife. To avoid air bubbles, do not exert excessive pressure when compressing the tape. After drying, apply a second coat and carefully smooth down with a finishing trowel. Smoothing and skimming: spray with a 627 tip then smooth with a coating knife.

Catalogs

No catalogs are available for this product.

See all of Sofec‘s catalogs
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.