Flooring insulation

Thermal conductivity: 0.035 W/(m.K)
Thermal resistance: 0.8 m²K/W
Length: 1,350 cm

Thermal conductivity: 0.04 W/(m.K)
Length: 1,000 mm
Width: 600 mm

... ROCKFLOOR® is a mono-density board designed to absorb impact noise in separating floors. It is a tissue-faced, high compressive insulation slab, designed with Part E (Acoustic) regulations in mind. The ROCKFLOOR® range ...

Thermal conductivity: 0.036, 0.035, 0.034 W/(m.K)
Thermal resistance: 0.85 W/(m.K) - 5.55 W/(m.K)
Thickness: 40 mm - 120 mm

The STYROFOAM™-A Solution for insulating groundbearing and suspended floors in new build and renovation projects is FLOORMATE™-A. FLOORMATE™-A grades are manufactured in the UK using technology that takes CO2 from ...

Thickness: 8, 17 mm

... down a stairs. If high-quality impact sound insulation such as VIBRAX-DAMP 17/8 is not provided, the resulting vibrations can cause disturbances in neighbouring or connecting areas. Impact sound insulation ...

Profloor Dynamic Deck 26 provides the high degree of isolation necessary to give significant improvements in impact sound insulation. Profloor Refurb Deck System utilises the dynamic properties of dual foam technology ...

Thickness: 4.6, 8 mm

... granular rubber, D. 750 kg/m³ for insulation from the noise of footsteps. It is used under the screed. According to the norm EN 12354, acoustic performances vary depending on the thickness; ΔLw=24dB is the minimum insulation ...

Thermal conductivity: 0.036 W/(m.K)
Thermal resistance: 0.8 m²K/W - 6.65 m²K/W
Thickness: 30 mm - 240 mm

... AREAS OF APPLICATION : Flexible cavity insulation in roof, dry wall and floor constructions Cavity insulation for partition walls, dry external walls and service zones MATERIAL : Wood fibre ...

Thermal conductivity: 0.3 W/(m.K)
Length: 120, 240, 270, 300 cm
Width: 90, 120 cm

Protect tiled walls from mould and moisture. This 12.5mm gypsum tile backer board for walls is easier and safer to work with than cement boards, and gives you plenty of protection in wet areas. Glasroc H TileBacker 12.5mm has a ...

Lightweight. Versatile. Superior Sound Retention. These are characteristics Lite-Deck can offer. Lite-Deck is the solid concrete alternative for conventional floor and deck applications in residential homes, commercial buildings, and ...

Thermal conductivity: 0.043, 0.042, 0.04, 0.039 W/(m.K)
Thickness: 40 mm - 240 mm

... and on-roof insulation on sheathing Außendämmung von Holzständerwänden hinter Fassadenbekleidungen Exterior insulation of timber stud walls behind façade claddings Insulation on raw ...

Thermal conductivity: 0.022 W/(m.K)
Thickness: 30 mm - 120 mm

Thickness: 17 cm

Acoustic insulation supplied in panels with a dimpled shape on one side with a thickness of 18 mm, made of SBR fibres and granules compacted using a polyurethane binder in a hot process. A blue synthetic non woven anti-stretch ...

Thermal conductivity: 0.039 W/(m.K)
Thickness: 21, 31 mm

Versatile impact insulation board for all floor applications Wet screed (cement, anhydrite, etc.) Mastic asphalt Dry screed Superb air and impact insulation Compressibility with live loads ≤ ...

Thermal conductivity: 0.036 W/(m.K)
Thermal resistance: 1.1 m²K/W - 5.55 m²K/W
Length: 1,200 mm

Length: 1,219 mm - 11,938 mm
Width: 609 mm
Thickness: 89 mm - 356 mm

THE NEXT GENERATION OF INSULATION Advanced fiber technology delivers improved recovery and stiffness for a faster install. Superior texture with less clumps and chunks for clean cuts with one pass, less dust and a smooth ...

... polyethylene 3 mm (33 kg/m3) combined with EPDM mass layer 4 or 5,5 kg/m2 APPLICATION: Sound insulation treatment of walls, ceilings, piping systems and floorings DIMENSIONS: m 1x5, thickness 5 mm

Length: 1,219 mm - 11,938 mm
Width: 381 mm - 489 mm
Thickness: 89 mm - 356 mm

Advanced fiber technology delivers improved recovery and stiffness for a faster install. Superior texture with less clumps and chunks for clean cuts with one pass, less dust and a smooth surface that passes inspection. Compression packaging ...

Thickness: 13 mm

SONIC PANEL is a soundproofing system for floating screeds comprising an plastomeric polymer bitumen membrane with a polyester carrier, laminated with a resilient 10.0 mm-thick polyester fibre layer for a total thickness of 13.0 mm (before ...

... high density expanded polystyrene (EPS) radiant heat insulation product that increases installation speeds, is easily cut to meet any angle or radius while providing R-10 of insulation value. Insulation ...

Thickness: 25 mm - 100 mm

SilveRboard Rigid Foam Insulation is a high performance flat-sheet insulation material made from Expanded Polystyrene (EPS) which is coated with a layer reflective lamination on both sides. This highly ...

Thermal conductivity: 0.038 W/(m.K)
Thickness: 300 mm

Application area: System element, which meets passive house requirements: Marginal stop, insulation of formwork support in floor plate concreting

Thickness: 6 mm

... production. NEST contains neither V.O.C. (Volatile Organic Compounds) nor formaldehydes. The improvement of the thermal insulation makes it possible to carry out money and energy saving. Pure aluminum Facing Blanket ...

Thermal conductivity: 0.04 W/(m.K)
Thickness: 4 mm

... SPACE REFLEX® reflective sheet is perfect for the insulation of floors, due to its lightness manageability and easy application, creating the necessary comfort during its construction. SPACE REFLEX® insulation ...

Thermal conductivity: 0.036 W/(m.K)
Length: 1,190 cm
Width: 38, 58 cm

... fibre wool insulation batts are:- high density flexible wood fibre wool (with <7% polyester), great for thermal and acoustic insulation. a simple way to keep your home cool in the summer and warm ...