|
|
Description:
60mm diameter beacon for flush-mount adjustment consisting of a stainless-steel square or round trim and a tempered-glass circular diffuser. Lights up with LEDs and it has accessories available for non-mains use (PBL units) or at low safety voltage (TL transformer). Particularly suitable for signalling in damp environments.
Characteristics:
Format: AQUA
Operation: Luminaire
Voltage: 230 V 50Hz, 24 V AC/DC
Mains lamp: Amber, white, red and blue LED
Emergency lamp: -
Degree of protection: IP66 - IK07
Autonomy (h): It depends on the power suppy unit*
Electrical insulation: Type II, Type III
|
|
Description:
6mm diameter flat-fitting unit comprising a cylindrical stainless steel body and a polycarbonate opal or transparent diffuser that picks up the LED colour. It includes accessories to enable operation only when connected to the mains power supply (TL safety transformer) or with the mains power on or off (PBL equipment).
Characteristics:
Format: CLAVO
Operation: Luminaire
Voltage: 24V AC/DC
Autonomy: It depends on the power supply unit*
Mains lamp: Amber, white, red and blue LED
Degree of protection: IP64 IK07
Electrical insulation: Type III
|
|
Description:
20mm diameter flat-fitting unit comprising a round stainless steel embellisher and a circular polycarbonate transparent diffuser that picks up the LED colour. It includes accessories to enable operation only when connected to the mains power supply (TL safety transformer) or with the mains power on or off (PBL equipment).
Characteristics:
Format: LEDA
Operation: Luminaire
Voltage: 24 V AC/DC
Autonomy (h): it depends on the power supply unit *
Mains lamp: Amber, white, red and blue LED
Degree of protection: IP64 IK07
Electrical insulation: Type III
|
|
MINI and NIQ leds projectors to be embedded. They incorporate high intensity LUXEON K2 Leds, so the luminance power is assured.
They are valid projectors for indoor and outdoor uses, but its safety class IP68, makes ideals for outer architectonic illumination and aquatic illumination of sources or spaces. These lights incorporate a high resistance glass that makes suitable for zones where there is circulation of people (walks, gardens, public facades, dancing sources in whom it is walked above, parks of game for children,…)
|
|
Luminous bar with LED conceived to trace lines
luminous continuous in any rigid form of mediums.
The bar is equipped with 240LED/m moulded in one
profile of embedding out of aluminum anodized with one
very low thickness. It is fed in low tension of
security (48V), which returns it adapted particularly to
the installation in the public places. Colors of the LED:
cold white (HW) or white heat (HE).
- Low thickness (18mm). Length on request
(until 2m). Possibility of aligning several bars
in order to create continuous luminous lines.
- Electronics components moulded and thus protected
moisture and shocks.
- Advantages of the LED: remarkable longevity (according to
color up to 100.000 hours); low fuel consumption;
resistance to the vibrations)
|
|
Block of lighting of environment or anti-panic with LED with
transparent or frosted window conceived to ensure one
uniform lighting in the event of breakdown sector. The part
luminous - 6 LED of power - is placed in a box
out of tack welded aluminum of rectangular section
closed at the two ends. Lighting especially
conceived for an integration in spaces claiming
a certain esthetism.
Completion adapted to interior architecture.
Advantages of the LED: longevity (up to 50.000 hours);
low fuel consumption; resistance to the vibrations.
|
|
Recessed square downlight for 21W LEDs technology (Light
Emitting Diode).
New spring system for lamp replacement through a quick
and easy front opening.
Front and housing made of stamped steel sheet.
Specular aluminium reflector (99,9% purity).
Protective decorative glass.
Class II luminaire.
|
|
With our LED downlights for interior and exterior use we offer long-lasting, low-energy illumination. We use 1W power LED.
Recessed LED Downlight IP 65 Same as above, but with round housing.
|
|
|
(type 5). This innovative and compact light box (patented) is an ideal solution to create decorative lighting effects, for interior or exterior applications and for applications where vol have some problems < dimensions for light box or noise Only on request, you can have different led colours
|
|
The MRI Luminous SkyCeiling expands the confined atmosphere of the MRI suite into a comfortable healing environment. Combining the proven effect of natural imagery with the therapeutic quality of bright RFfreeLux™ LED lighting, the MRI Luminous SkyCeiling produces a compelling experience of the sky's vast openness and vitality – calming patients during the radiological procedure.
SkyCeilings™ (virtual skylights) are architectural illusions of the sky that deliver an authentic experience of nature. Our SkyCeilings elicit genuine psycho-physiological relaxation responses in the observer and transform enclosed spaces into beautiful, daylight-filled environments of refreshing vitality. Additionally, these design solutions are also known to increase productivity, reduced fatigue and result in higher employee satisfaction in a work environment. Luminous SkyCeilings (back-lit) consist of translucent panels, a choice of our energy efficient LED or fluorescent "daylight-balanced" lighting systems, and our patent-pending 'elevator system' that gives the ceiling grid a three-dimensional appearance.
|
|
The PLUG & PLAY are a product ready with employment (no programmatio necessary) with catch sector 230V.
Tubes color LED - 24V
- Length 1m
- Products of outside - IP 44
- Products available only on order
Advantages
Very low tension (24v)
Power
Low electricity consumption
Lightness and facility of installation
Great reliability
|
|
|
The Baseline series is a slim profile (1.7" H 0.9") linear LED strip that combines industry leading LEDs with high performance reflector optics to generate intense beam patterns for a wide range of outdoor and indoor flood and wash applications.
|
|
|
The Slimline series is an extremely slim profile (1.4" H 1/2") linear LED strip that delivers industry leading LEDs optimally spaced to produce uniform surface illuminations. The series includes a wide selection of mounting optics to suit any installation.
|
|
|
The Colourline is a full RGB color LED linear bar (1.4" H 1.9") that combines industry leading LEDs with a cylindrical lensed housing to optimize color mixing for direct view and close proximity surface and backlighting applications. Through the use of SMD multi-chip RGB LED technology rather than individual R-G-B LEDs, insures maximum uniformity of light output.
|
|
|
The Extremeline 100 series is a powerful projector system in a low profile (3.1" H 1.4") linear LED strip that combines industry leading LEDs with ultra high performance optics spaced to maximize illumination power while producing exceptionally tight beam control without striations.
|
|
|
The Extremeline RGB series is a powerful full RGB color projector system in a low profile (3.1" H 1.4") linear LED strip that combines industry leading LEDs with ultra high performance optics spaced to maximize illumination power while producing exceptionally tight beam control without striations.
|
|
Led spot for exterior. Stainless steel body. Obtained from a round billet to optimize the heat dissipation, gaskets to protect against dust and water infiltration and waterproof metal gland. Led 3W 1W 350mA high emission, optic with triple lens with optic 25/30°, glass protection and screw lock nut. Stainless steel drilling brackets to fix and adjust the spot. IP 68 allowed to protect the spot in case of water dipping. The spot can be fixed using the accessories, wall/ceiling (for an easy maintenance) and peg for the ground.
|
|
Led spot for external. Body in anodized aluminium obtained from a billet to
optimize heat dissipation, gasket for protection against dust and water, tight cable gland in metal. The projector is equipped with 6 Led Luxeon K2
700mA (18W tot.) high emission, internal driver at 10/30V DC. This driver
is able to adjust the drop of tension in case of longest cable using 24V DC
feeders. Optic with 6 lenses 10/25/40° beam fixed on eletronic circuit,
protective glass and threaded ring in aluminium. Recessed box in synthetic
material to install the spot in concrete. IP68.
|
|
Led spot of small dimensions for internal use. Aluminium anodized body,
obtained from a round billet to optimize the heat dissipation. Led 3W 700 m
high emission, I.R.L. optic with lens 60° and threaded ring. Stainless steel
bracket to fix the spot and adjust it. IP40.
|
|
The Avant lights is characterised by the most comprehensive Lamp range of lamp varieties, sizes, finishes and technical accessories. Minimalist, with stylised proportions it fits perfectly into any architectural atmosphere. There are four very different sizes of models, with two possible finishes, two-tone light/dark grey or matt white. All of these models are available with halogen, metal halide and LED lamps.
This range of lights can be used in places such as shops, museums and galleries since it has technical accessories like refractors, anti-glare grills and colour filters that enable high technical performance levels.
|
|
NEW PRODUCT 2007/2008
LED Spot light for bed side.
To be inserted into a wood panel.
Delivered with a 3 Watts (equivalent 40 W) LEDlight white warm light (3000° K).
Narrow beam to allow confortable reading .
For bed side use.
Price quoted for 1 spotlight with one miniature (15mmx30mmx45mm) electronic transformer.
50 000 hours.
Available from October 2007 in a black and nickel bright finish with or without switch.
Please note: To be fixed into a wooden panel.
|
|
When you need reliable, durable lighting for industrial applications, EFO has the solution and more. Not only do we offer the quality and intensity you desire, our fixtures are energy efficient to boot. Our recommended industrial fixtures have passed military shock and vibrations test and with a 50,000 hour LED life, you’ll never be caught in the dark.
The powerful LED Dock Light shines into even the darkest corners. Driver is build in.
|
|
Recessed downlight in thermoplastic material with 1 LED.
|
|
LED Assembling Module Type AT951
The LED Assembling Module Type AT951 was customised to meet individual illumination conveniences.
Versatile
LEDworx® assembling spotlights are part of a building kit of different modules that can be fit together user-defined or can be customised as separate LED-spot for individual illumination settings. This makes our LED-modules not merely an illumination device, but also tool for personalised and creative living.
Aesthetic
The LED spots are available in black or white colours and are produced from reusable synthetic material. Cover and lens optics are manufactured from UV-resistant polycarbonates.
|
|
Spot LED - small delight
Featuring an innovative light emitting diode, the Spot LED is a real revolution in accent lighting. With an adjustable projector head of only Ø 31mm, this is an incredibly small luminaire.
It incorporates the LUXEON® K2 high power LED, which delivers more light than ever before and has no UV/IR radiation. Spot LED is available as a complete range - surface mounted, recessed, track mounted and wall mounted.
|
|
Delicate and small built-in and surface-mounted spots with great lighting power, designed for the OSRAM MiniStar reflector lamp with bi-pin socket or alternatively fitted with a latest generation 1W power LED.
All metal parts are turned and milled of solid brass or aluminium, and are available in two finishes: satin-nickel or glossy nickel. In the surface-mounted models, the transformer or the LED driver is built into the base. The joints can be swivelled and rotated.
|
|
LED Linear Light Type AT753-C
With the new linear light AT753-C, our expectations for best usage of energy and absolute light quality are met.
Economical
Its form makes the linear light especially adept to replace common fluorescent lights economically.
Deliberate
Specialities and advantages of linear light AT753-C are extremely robust case, waterproof, heat resistant and maintenance free. Optional: explosive protected.
|
|
| ... products without information |
| |
|
|
Architectural lighting : LED lights
