Building coatings

... , Stolit. A balanced formulation and high quality raw materials provide Stolit with outstanding qualities in application, building characteristics and individual design. Features & Benefits Universally tintable in the full 800 colours ...

Capacity in Kg: 25 kg

... paints. It is very important in all energy-efficient solution as a protection against water circulation through a construction or building elements, both outdoors and indoors. All holes should be sealed, to avoid thermal ...

... protection for cement-bonded silicate building boards against aggressive media. At the same time, the impregnation strengthens the surface due to its great depth effect.It is ideal for the fire protection building boards ...

Capacity in Kg: 25 kg

... UdiLIVE® Fine lime plaster Used as a surface finish or final coating on the reinforcing layers of interior insulation UdiIN RECO®, UdiIN 2CM® and UdiIN®. UdiLIVE® Loam Fine Plaster Serves as an attractive finishing coat in ...

Two-component mortar: comp. A hydraulic binders, selected aggregates, special additives; comp. B synthetic polymers in watery dispersion. By mixing the two components, you obtain a mix that is easily workable and applicable, both horizontally and vertically, ...

Ultima light Dustbuster from Panel Rey® is a multipurpose joint compound that is easy to apply and has an excellent finish. It produces less dust in the air during sanding, reducing the impact in the Interior Air Quality. It is specially designed to provide ...

... Description BioRid is a waterborne functional coating containing micropores, which eliminate moisture and keep the surface dry. BioRid is especially suitable for new and previously painted surfaces in conditions where protection of the ...

A surface-applied, integral crystalline waterproofing material, PENETRON is used for waterproofing and chemical protection at above and below ground level.PENETRON is applied by brush or spray to either the positive or the negative side of the concrete ...

... Uniform Strength and Hardness. Uniformity is assured through exact proportioning and thorough mixing of graded perlite and gypsum plaster at the mill. Gypsolite provides a uniform base for the finish coat. Lightweight. Gypsolite weighs ...

... Lightweight filler for masonry surfaces. Concrete Coatings Gripper Block Surfacer is a premium quality 100% acrylic block surfacer and conditioner for filling and sealing concrete block, CMU and other masonry surfaces. It incorporates ...

... creates smooth or relief surfaces. You can obtain finishing such as Split Stone, Polished Stone, Worn Stone, Engraved Stone, Natural Cement, Zen Stone, Bamboo and Pietra Contemporanea. Must be finished with Cera del Vecchio which contains Beeswax and ...

... polymer coating system for structural plate, deep corrugated structural plate and tunnel liner plate. Our research and development started in 2004 and continues today. Our ongoing testing program has allowed us to increase the specified ...

Capacity in Kg: 25 kg

... resistance; 6.It has high effective ingredients, can be coated with thick coating at one time, and the dry film thickness of one layer of airless spraying can reach 200 u m; 7.The construction is convenient, ...

... 60% biobased on resin part* Easy 4/1 mixing ratio by weight Ambient temperature curing Adjustable pot life Applicable in high humidity conditions *ratio of the number of biobased carbon atoms / the number of total carbon atoms RESOLTECH 2040G ...

... condensation problems. Handycoat ACP is a light weight ready to use filler and wall skimming compound for most interior building surfaces, including sand/cement render, gypsum board, concrete as well as previously painted surfaces. ...

Capacity in Kg: 25, 1,000 kg

... professionally applied to the entire surface in the upper third of the plaster build-up. ALL THE FACTS Crushed building clay, sand grains 0-2 mm Building authorities’ approval: DIN 18947 Application thickness: 5 ...

Superior quality silicone plaster with hydrophobic capillary effect, highly weather-resistant, water repellent with great water vapor permeability. It protects the surface from mildew and fungi. It provides resistance to UV radiation and heat. Suitable ...

... mineral based plaster (groups PII and P III as per DIN 18550-1). Also suitable as finish on matt emulsion- or silicate-based coatings. Note: Not for use on surfaces containing efflorescence, on plastics and wood or on surfaces with high ...

Capacity in Kg: 5 kg

... Substrates New or renovated, painted or unpainted substrates : • Gypsum plaster • Old painted surfaces • Cement, concrete, breeze blocks, bricks , stones • Glass, glazed tiles Overcoating Any coating resistant to ...

... forms an air seal after drying, with a moisture-variable diffusion resistance. Usage/Purpose Specifically designed for building applications where a high level of air tightness is required (eg Passive House). Apply for air and vapour ...

... is a homogeneous elastic medium grain coating, which provides a troweled finish. The product consists of special acrylic elastomeric resins in water dispersion which provide excellent weatherability and resistance to acids, U.V.rays and ...

... Excellent quality, water based, elastic, hybrid coating for roof sealing. It is based on new technology acrylic and polyurethane resins. It stands for its great resistance to outdoor weather conditions, its long lifetime and its high ...

Capacity in Kg: 10 kg

... For external applications, FRED should be overcoated with a suitable fire-retarding flexible external coating or used in accordance with local building regulations.

Capacity in Kg: 0, 1, 3 kg

... b>Shade
White

Field of application
Exterior and interior (for exterior use ensure rapid follow-up coatings to avoid defects caused by wood movement)

Package size

• 200 g
• 400 g
• 1

... Acrylic wall coating Thixotropic 1 component product, easy to applied, based on a waterborne elastomeric acrylic copolymer. By the evaporation of the water the coating becomes very flexible and with a good resistance ...

... Concentrated soap with wax for finishing and maintenance of wooden floors with a soap finish. Dinesen Floor Soap Natural provides a warm and natural expression. When Dinesen Floor Soap Natural is used regularly, a soap membrane is formed that protects ...

... A self levelling compound for levelling from 0-20 mm Ories in 24 hours and is simple to lay ...

... ECOguard is a revolutionary coating designed to preserve the beauty of ECOsurfaces that is now standard on all ECOsurfaces wear layers (excluding tile products and ECOnights). It is a factory-applied maintenance coat that protects the ...

... carbon reduction. The major way to reduce energy consumption of buildings is either improving the energy efficiency of building equipment or reducing the energy consumption of building evelopes. The ...

... together with excellent breathability, make it especially suitable for coating exterior facades of civil and industrial buildings, for coating floors and walls of rooms that are washed frequently with ...

RASAGYPS is a pre-mixed universal soother in a white-coloured powder made up of calcium sulphate hemihydrate, hydrated lime, limestone aggregates, co-polymers, non-toxic additives in quantities less than 1% (consisting of modified celluloses and surfactants ...

... One component, aliphatic polyurethane based coating material with high permanent elasticity, superior UV resistance, color stability and easy-to-clean surface. It has a special curing system (triggered by the moisture) and does not create ...

Capacity in Kg: 15 kg

It is a cementitious mortar that is part of the set of products of the Microcement Ó deco system. Its function is to regularize the support, prior to the application of Microcement Walls or Floors. It can be used as a finishing microcement, with a rustic ...

... * CVT - Epoxy primer and low viscosity hardener and high penetration for base preparation and string impregnation * CVT - impregnating - fissotropic epoxy resin and hardener for fabric impregnation Fissotropic epoxy resin and hardener for grouting Thixotropic ...

Capacity in Kg: 20 kg

... polymer-cement waterproofing coating. Purpose: Waterproofing of basements, bathrooms and balconies. Protection of underground concrete structures and barrier against capillary rising damp in foundations. Benefits: A flexible coating ...

... resistance Solvent-free CONICA products are mostly solvent-free CONIFLOOR IES SR is a coloured epoxy resin self-smoothing coating for heavy and medium mechanical loads. The flooring is extremely resistant to chemicals and is solvent-free. ...