-
{{>productsMenu}}
- Catalogs
-
{{>projectsMenu}}
-
{{>trendsMenu}}
- E-MAGAZINE
- Building & Construction >
- Building material >
- Sheet metal
Sheet metal
{{product.productLabel}} {{product.model}}
{{#if product.featureValues}}{{product.productPrice.formattedPrice}} {{#if product.productPrice.priceType === "PRICE_RANGE" }} - {{product.productPrice.formattedPriceMax}} {{/if}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{product.productLabel}} {{product.model}}
{{#if product.featureValues}}{{product.productPrice.formattedPrice}} {{#if product.productPrice.priceType === "PRICE_RANGE" }} - {{product.productPrice.formattedPriceMax}} {{/if}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}

... between supports (steel material ) This steel profiles are intended to be used as rainscreen cladding with vertical or horizontal joints between profiles The Crescendo® profiles are made with pre-coated steel ...
ArcelorMittal Construction

This trapezoidal roofing profile has a cover width of 672 mm and sets itself apart through its narrow and deep waves. Atypical and rythmical design Unique thickness 0.75 mm Maximum length 12 000 mm Available with Haircotherm ...
ArcelorMittal Construction

This corrugated roofing profile has cover width of 900 mm and can be complemented either with notch curving or with a condensation regulator. 3 thicknesses of steel available, from 0.75 to 1.00 mm Maximum ...
ArcelorMittal Construction

... were further developed over time. Roll roofing is one type of roof system that is steeped in tradition. RHEINZINK developed click roll cap roofing from the older roll roofing system. ...

... behaviour classification (EN 13501-1): A2 Applications Granite® HDXtreme is designed for roofing and cladding applications made from sandwich panels or profiled sheets. It is also suitable for the manufacture ...
ArcelorMittal Europe – Flat Products

... product for surface hardness and excellent robustness for handling and processing Applications Granite® HDX is ideal for roofing and external facades and is more than capable of dealing with harsh, cold northern and ...
ArcelorMittal Europe – Flat Products

... been developed for roofs. The Modern range can be used for facades and several other systems such as sandwich panels and profiled sheet panels. Aesthetics A deeply textured matt mineral finish available ...
ArcelorMittal Europe – Flat Products

... lengths available Galvalume / Zincalume Painted Steel Options: 18 GA* (1.19mm) / 20 GA (.91mm) / 22 GA (.76mm) / 24 GA* (.60mm) Aluminum Options: .032 GA (.80mm) / .040 GA (1mm) / .050 GA (1.27mm) Stainless ...
MORIN Corporation

... lengths available Galvalume / Zincalume Painted Steel Options: 18 GA* (1.19mm) / 20 GA (.91mm) / 22 GA (.76mm) / 24 GA* (.60mm) Aluminum Options: .032 GA (.80mm) / .040 GA (1mm) / .050 GA (1.27mm) Stainless ...
MORIN Corporation

... lengths available Galvalume / Zincalume Painted Steel Options: 18 GA* (1.19mm) / 20 GA (.91mm) / 22 GA (.76mm) / 24 GA* (.60mm) Aluminum Options: .032 GA (.80mm) / .040 GA (1mm) / .050 GA (1.27mm) Stainless ...
MORIN Corporation

Specifications - en Lengths Available (mm) 1500 tot 18000 Gauge (mm) 0,75 / 0,88 Material S 320 GD Coating Galva: Sendzimir verzinkt Interieurcoating RAL 9002 Grey White
Joris Ide

Specifications - en Lengths Available (mm) 400 à 13600 Gauge (mm) 0,75 / 0,88 / 1,00 Material Tôle d’acier S 320 GD Coating prélaquage polyester, 15μ RAL 9002 et RAL 9010 galva. Pour les autres revêtement nous consulter
Joris Ide

Specifications - en Lengths Available (mm) 400 à 13600 Gauge (mm) 0,75 / 0,88 / 1,00 Material Tôle d’acier S 320 GD Coating Prélaquage polyester 15μ et galva. Pour les autres revêtements nous consulter
Joris Ide

This family combines aluminium sheet panels. Optionally, the panels can be made with different materials and finishes (steel, polycarbonate, zinc, HPL, etc.) and applied to any opening system. The Dupanel Perforée ...

This family combines aluminium sheet panels. Optionally, the panels can be made with different materials and finishes (steel, polycarbonate, zinc, HPL, etc.) and applied to any opening system. The Dupanel Opaque model ...

This family includes aluminum sheet panels, can optionally be manufactured in different materials and finishes (steel, polycarbonate, zinc, HPL, etc.…) and can be applied to any opening system.

... and shade, bright and dark, dry and wet – all generate different optical nuances that make TECU® Iron a popular material for metal facades.
KME

Europerfil EUROBAC 80 metal tray profile (1.405.80). Nerve height 80 mm, useful width 450 mm, and thickness from 0.6 mm to 1.20 mm. galvanised and pre-lacquered steel (as per XP P 34.301 and EN 10169) ...
EUROPERFIL, SA

Europerfil EUROBAC 80 metal tray profile (1.405.80). Nerve height 80 mm, useful width 450 mm, and thickness from 0.75 mm to 1.20 mm. Galvanised and pre-lacquered steel (EN 10169) in standard Europerfil ...
EUROPERFIL, SA

Europerfil EUROBAC 150 metal tray profile (1.600.150). Nerve height 150 mm, useful width 600 mm, and thickness from 0.6 mm to 1.20 mm. Galvanised and pre-lacquered steel (as per XP P 34.301 and EN 10169) ...
EUROPERFIL, SA

Width: 1,000 mm
Length: 3,000, 2,000 mm
... iron, stainless steel, brass, copper perforated sheet aluminum, iron, galvanized iron, stainless steel micro-expanded metal aluminum, iron. Metal sheets ...
EMBOSS

... , UAE) and Maritime (Israel, Australia). Corrugated Panels Thinner metal gauges combined with the same corrosion resistant paint systems can also be offered as corrugated sheet of up to 13m (limited ...
Elval Colour S.A.

... gutters and its accessories. Aluminium is a soft, lightweight but strong material; its weight is about one third to that of steel or copper; it is malleable, ductile and can be easily formed; it has excellent corrosion ...
Elval Colour S.A.

Elval Colour is one of the leading manufacturers of coated aluminium strip for the rolling shutter market. Years of investment in coil coating paint application technology and long ongoing partnerships with leading European manufacturers ...
Elval Colour S.A.

Width: 1,100 mm
Thickness: 0, 4 mm
Nordic Standard is mill-finish copper without any surface treatments. Technical Details Length - Unlimited Delivery forms - Sheet, coil Other dimensions upon request. Nordic Standard –mill-finish copper Nordic Standard ...
Aurubis Finland Oy

Width: 1,000 mm
Thickness: 1, 2 mm
... brown surface that otherwise develops over time in the environment. Technical Details Length - Unlimited Delivery forms - Sheet, coil Other dimensions upon request. Nordic Brown – pre-oxidised copper Nordic Brown ...
Aurubis Finland Oy

Width: 1,000 mm
Length: 1,000 mm
Thickness: 2, 1 mm
... yellow color. Technical Details Nordic Brass Length - Unlimited Delivery forms - Sheet, coil Other dimensions upon request. Nordic Brass Weathered Delivery forms - Sheet, coil Other dimensions upon ...
Aurubis Finland Oy

A profile in corrugated sheet form, with a height of 18mm and available in various finishes: galvanised, pre-painted, and aluzinc. With numerous thicknesses, up to 1.2 mm. Useful width measurements are 836mm, 1,064mm ...
HIANSA PANEL S.A

The Ibiza profile for architectural façades is an example of the developments that have taken place in the construction industry with respect to modern architecture. The Hiansa Ibiza profile has been specially designed for those projects ...
HIANSA PANEL S.A

The MT-32F Hiansa sheet is has a 32mm high ribbed form with thicknesses up to 1.2 mm. Its useful width is 1,000 mm. with lengths of between 1,000 and 14,000 mm. Other thicknesses and lengths may be supplied on request. ...
HIANSA PANEL S.A

TRIANGULAR RIB Width : According to the number of steps Maximum length : 3000 mm Minimum steps : 85 mm Wave height : 34,5 mm
TOLARTOIS

TRAPEZOIDAL RIB Width : According to the number of steps Maximum length : 6000 mm Minimum steps : 62,5 mm Wave height : 13,3 mm
TOLARTOIS

TRIANGULAR RIB Width : According to the number of steps Maximum length : 6000 mm Minimum steps : 75 mm Wave height : 38 mm
TOLARTOIS

Excellent corrosion resistance, high deformability, thermal and electrical conductivity. High reflecting power. Particular attitude to anodic oxidation.
Cantori srl

Width: 1,500 mm
Thickness: 1 mm - 2 mm
Steels used for applications where resistance, rigidity or flexibility are required. Characteristics and typical applications: Steels used for applications where resistance, rigidity or flexibility are required. The main applications ...
Cantori srl

Width: 1,500 mm
Thickness: 1 mm - 2 mm
Steels with low carbon content hot-rolled pickled, intended for molding by bending or molding.
Cantori srl

Width: 1,000 mm
Length: 2,000 mm
Thickness: 1 mm
is available in a range of natural, warm and attractive graded colours in red, blue, green, black, gold and brown. It is rolled titanium zinc which complies with the European standard UNE-EN 988. elZinc Rainbow® is achieved by applying ...
ASTURIANA DE LAMINADOS

Width: 500, 600, 650, 670, 100 mm
Thickness: 1 mm
elZinc Rainbow® is available in a range of natural, warm and attractive graded colours in red, blue, green, black, gold and brown. It is rolled titanium zinc which complies with the European standard UNE-EN 988. elZinc Rainbow® is achieved ...
ASTURIANA DE LAMINADOS

Width: 500, 600, 650, 670, 100 mm
Thickness: 1 mm
... hesitate to ask about personalized finishes. Main applications - Roofing and facade cladding . Accessories for rainwater drainage Interior decoration. Standard sheet sizes - 1000 x 2000 ...
ASTURIANA DE LAMINADOS

SPECIFICATIONS Materials: AISI 304, AISI 316 L antislip class R 11 und R 12 Finish: special grinding, one-side laser suitable coated Thickness: 0.80 / 1.00 / 1.25 / 1.50 / 2.00 / 2.50 3.00 / 4.00 / 5.00 / 6.00 mm Dimensions: 1000 ...
STRUKTURMETALL GmbH & Co. KG

SPECIFICATIONS Materials: AISI 304, AISI 316 L antislip class R 10 Finish: special grinding, one-side laser suitable coated Thickness: 0.80 / 1.00 / 1.25 / 1.50 mm available at stock Dimensions: 1250 x 2500 / 1500 x 3000 mm special ...
STRUKTURMETALL GmbH & Co. KG

SPECIFICATIONS Materials: AISI 304, *AISI 316 L antislip class R 12 displacement space V10 Finish: hot rolled Thickness: 3,00 / 4,00 / 5,00 / 6,00 mm + tear height ca. 1.50 mm *AISI 316 L from 4,0 mm till 6,0 mm base thickness Dimensions: ...
STRUKTURMETALL GmbH & Co. KG

Prater is a expanded metal sheet, born with the aim of continuously widening the products range. It is an hexagonal mesh and has a soft and sinous profile suitable for any cladding.
Fratelli Mariani

... for the creation of roof-gardens. The hole diameter and the material have been carefully chosen in order to let the expanded metal and the plants live together. Technology and nature, a possible match.
Fratelli Mariani

Tribeca is a real metallic cloth. It was created with the aim of continually amazing. It is suitable for any interior application both for walls and ceilings.
Fratelli Mariani

... rusting to a minimum and ensures excellent weather resistance without the need for paint or other chemicals. MaterialCorten steel Thickness2.0 mm to 6.0 mm FinishNatural or weathered Panel size1,500 mm x 6,000 mm

... POHL Duranize® Bronze impresses with a warm and vibrant allure and is available in different color gradings. This POHL metal product is a sustainable construction product, manufactured without any coating or paintwork. ...

... or when loose grounds - like on construction sites - must also be made suitable for heavy vehicles. Then Graepel flooring sheets are a safe option for making unpaved areas temporarily or permanently accessible. They ...
GRAEPEL

alwitra coated metal sheets are thin steel or stainless steel sheets (EVALON®/EVALASTIC® coated metal sheets) or thin ...

Perforated Metal is made by punching shapes through a sheet of metal. Circles, rectangles, and crosses are the most frequently used patterns and customized shapes can be created to suit ...

PARAMETERS Specifications and Sizes: Aluminum skin thickness: 0.12mm-350mm Width:500mm-2600mm Length: according to customer deamand Standard size: 1000mm(Width) Non-standard sizes and special colors are available depending on customers’ ...

Aluminum expanded metal texture is unique, rich, lasting color, strong tensile level of appearance can make a diversity of styles and materials and glass curtain wall, stone curtain wall material perfectly. Decoration ...
Comtrust Architectural Mesh Co., Ltd.

Aluminum expanded metal texture is unique, rich, lasting color, strong tensile level of appearance can make a diversity of styles and materials and glass curtain wall, stone curtain wall material perfectly. Decoration ...
Comtrust Architectural Mesh Co., Ltd.

Aluminum expanded metal texture is unique, rich, lasting color, strong tensile level of appearance can make a diversity of styles and materials and glass curtain wall, stone curtain wall material perfectly. Decoration ...
Comtrust Architectural Mesh Co., Ltd.

CNC Perforated sheet aluminum solid panel for facade Place of Origin: China Brand Name: M-CITY Model Number: MCT-G004 Payment & Shipping Terms:by T/T L/C Minimum Order Quantity: 80square meters
M-City Aluminum Co., Ltd.

CNC perforated panel metal sheet cladding Aluminum Place of Origin: China Brand Name: M-CITY Model Number: MCT-G004 Payment & Shipping Terms:by T/T L/C Minimum Order Quantity: 80square meters
M-City Aluminum Co., Ltd.

Aluminum cutting sheet with perforated pattern used for exterior garden fence Place of Origin: China Brand Name: M-CITY Model Number: MCT-004 Payment & Shipping Terms:by T/T L/C Minimum Order Quantity: 80square meters Price: ...
M-City Aluminum Co., Ltd.

... application: - 3D metal facades, 3D wall claddings, 3D ceiling linings, 3D sun protection and sound insulation Material: - Aluminium, stainless steel, steel, copper alloys, other alloys on request Style: - Solid or perforated ...
Binder Parametric Metal GmbH

... gentle 3D metal sheet. This pattern exposes an ongoing and varying interplay between shape, colour and light, based on its descreet kind of materiality and surface treatment (also as perforated metal ...
Binder Parametric Metal GmbH

... application: - 3D metal facades, 3D wall claddings, 3D ceiling linings, 3D sun protection and sound insulation Material: - Aluminium, stainless steel, steel, copper alloys, other alloys on request Style: - Solid or perforated ...
Binder Parametric Metal GmbH
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how ArchiExpo processes your personal data.
Please specify:
Help us improve:
remaining