Waterproofing membranes

Thermoplastic waterproofing membrane with active polymer core (APC). Setting the standard for waterproofing membrane strength, durability and performance for more then ...

ELASTOBOND S6 and ELASTOBOND S6 MINERAL are elastomeric waterproofing membranes with outstanding performance, made of a latest generation distilled bitumen-based compound and thermoplastic elastomeric ...

... installation. Whether used as temporary protection for work over easily damaged membranes or as a permanent component in flat roof systems, this classic product is at home over waterproofing systems worldwide. Due ...

3-layer, vapour-permeable sheathing membrane with microporous film and woven grid Can be used in ventilated and unventilated roof assemblies as a trussing, sub-roof or sheathing membrane Can be used ...

... mono-filament structure and grouped in a bicuspid structure with sound-absorbing properties, protected by a second polypropylene membrane. Particularly suited for laying on sloping roofs with metal cover to prevent corrosion damage.

The infiltration of moisture into walls can trigger considerable direct and indirect damage that is often only detected after years. The necessary repairs are extremely complex and cost-intensive.

Ampatex Sinco vapour control and airtightness membrane is:- a highly tear resistant fleece membrane, with an Sd value of 5m, that regulates the moisture flow through walls, roofs and floors. finished ...

Geomembrane in FPO, waterproof, decoupling, anti-fracture, elastic, flexible, deformable, crack-bridging ability and dimensional stability between -40 °C and +80 °C, for waterproof barriers on substrates of any type and size before laying ...

... , PROFOLIO system sealing tape corners are flexible, cross stretch and backed with fleece on both sides all this helps to align the products to the nearest millimetre and provides excellent adhesion. Sealing and uncoupling ...

The KAB - combination construction joint waterstop is a waterstop with an integrated TPE - round swelling rubber profile used for the sealing of construction joints in concrete structures. The KAB - combination construction joint waterstop ...

... outdoor waterproofing treatment for corners between walls and floors, corners between walls and dividing joints (must not be used for structural joints) in screeds waterproofed with: RASOLASTIK, RASOLASTIK ADV HD and ...

Blueskin WB Window and Door Flashing is a self-adhering membrane consisting of an SBS rubberized asphalt compound, which is integrally laminated to a blue-engineered film. The membrane is specifically ...

Self-resealing waterproofing stripping, self-adhesive with very strong immediate adhesiveness and high elasticity. Used cold to repair waterproofing, all work involving pointing, ridges, fillets and parapet ...

... air-gap membrane that exceeds todays most demanding building codes. It has received a positive CCMC Evaluation as a stand alone Dampproofing and Drainage Layer and is presently being reviewed by the ICC-ES in the USA. DMX ...

... pre-applied waterproofing membrane can be installed on uniform and regular concrete blinding, compacted sand-stone cushion for waterproofing of below ground surfaces and is also used ...

DOMOREFLECT 122 MAX is a roof coating membrane based on a combination of solvent free aliphatic polyurethane and new generation nanomolecular hybrid resins. It stands out for its short drying time, enabling thus the applied ...

Pre-fabricated waterproofing membrane made of bitumen and plastomeric polymers (APP) having a single-fiber non-woven polyester reinforcement that provides good mechanical features and excellent dimensional ...

HydroBond 402-CCSM is a high performance membrane for the external waterproofing of below-ground foundation structures, basements, water holding tanks, culverts and tunnel bases. Pliable and durable, ...

USE Robust protective fleece for waterproofing buildings against strong mechanical loads PROPERTIES Drilling resistant Rot-proof Thickness: approx. 2.0 mm Dimensions - SU - SU per Pallet 3401 ...

Single-layer bentonite membrane for waterproofing and protection of liquid and solid waste landfills, reservoirs, dams, canals. Purpose: Waterproofing of underground concrete structures, ...

Polyester fibres Packaging: 16cm/100m - 100cm/100m Reinforcement of the Murfill® waterproofing system Reinforcement of the first coat of the Murfill® waterproofing system on flat surfaces.

The DRAINTUBE FTP is used in cell cover to drain rainwater and provide semi-waterproofing of the roof. In fact, it consists of a DRAINTUBE FT associated with PE film on the underside of the needle drainage, which limits ...

... artificial lake ..... PVC waterproofing membrane This waterproofing system is based on fully synthetic adhesive waterproof membrane. This type of membrane ...

... polymer-rich SBS modified bituminous torch-on membrane with a reinforcement core of tough glass fiber, used as a capping layer in waterproofing system. The DULAS range belongs to the Elastoproof group ...