Filling coating ULTRA-RS

for renovationfor indoor usewall

Application
Good filling capacity, easy-to-spread renovation filler. Resistant to shrinking and cracking up to 1 cm coating thickness. Deeper holes may be refilled after approx. 30 minutes. Ultra-RS offers a good spreading rate and is economical due to its low specific weight.

Product properties
Interior use. Ultra-RS is an extremely light, ready‑to‑use filler for repairing holes, cracks, flaws and damaged areas. The pasty viscosity allows non‑drip and thick‑coat application. Suitable for filling and smoothing damaged areas (dowel holes, breakouts etc.) on ceilings and walls made of gas concrete, gypsum board, wood, gypsum, plaster, brickwork and concrete. Also suitable for model making due to its low weight. Not suitable for metal or plastic surfaces.

Binder base
Acrylic dispersion

Drying
(23°C, 60% RH) Layer thicknesses up to 1 cm can be overcoated after approx. 60 minutes; thicknesses > 1 cm after approx. 3 hours. Ultra-RS is fully hardened after drying overnight. Values may vary at higher humidity or lower temperatures.

Type of application
With any rust‑free stopping knife

Shade
White

Field of application
Interior

Package size
1 l

Characteristics / technical specifications

• Ready for use, pasty viscosity for non‑drip and thick‑coat application
• Very light filler; low specific weight for economical spreading rate
• Good filling capacity; resistant to shrinking and cracking up to 1 cm layer thickness
• Deeper holes may be refilled after approx. 30 minutes
• Coating over times (23°C, 60% RH): up to 1 cm → approx. 60 minutes; >1 cm → approx. 3 hours
• Fully hardened after drying overnight (may vary with temperature/humidity)
• Suitable substrates: gas concrete, gypsum board, wood, gypsum, plaster, brickwork, concrete
• Not suitable for metal or plastic surfaces
• Binder: acrylic dispersion
• Application tool: any rust‑free stopping knife
• Package: 1 l; Shade: White; Field of application: Interior