Electronic thermostat Z-WAVE

programmablesmartfor heating

Product overview
The MAGNUM Z-Wave thermostat is an electronic wall-mounted thermostat designed for installation in a standard UK/EU back box. It integrates a Z-Wave 500-series chip for direct connection to Z-Wave home automation controllers. The display indicates floor or ambient temperature; touch-sensitive buttons allow intuitive local control and quick setpoint display. The device includes a single-pole switching relay and supports two external NTC temperature sensors (floor and room).

Key features

• Integrated Z-Wave 500-series communication for gateway control and automation
• Supports floor and room sensors (10K NTC) and up to two external sensors
• Single-pole switch rated for 16 A at 230 V (resistive loads)
• 7-segment backlit LCD display with touch buttons for local operation
• SmartStart (QR code pairing), OTA firmware updates and power metering

What is Z-Wave?
Z-Wave is a low-power wireless protocol for home automation. When paired with a Z-Wave gateway, the thermostat can be scheduled, monitored and controlled remotely via tablet or smartphone, and participate in automated scenes and energy-management scenarios.

Compatible systems
The MAGNUM Z-Wave thermostat is compatible with popular Z-Wave controllers such as Fibaro, Sensio, Vera and Zipato.

Product variants (article numbers)
825861 | MAGNUM Z-wave Control for Fibaro, Sensio, Vera and Zipato systems | Polar white – RAL 9010
825860 | MAGNUM Z-wave Control for Fibaro, Sensio, Vera and Zipato systems | Graphite black – RAL 9011

Specifications (summary)
Type | Smart Z-Wave thermostat
Suitable for | Electrical heating systems
Control | Touch buttons, display shows set value and temperature
Sensors | Room and floor sensor (10K); supports additional NTC sensors
Voltage | 230 V – 50/60 Hz
Maximum load | 16 A / 230 V
Temperature range | +5 °C to +40 °C
Housing | IP21

Technical specifications

• Built-in communication: Z-Wave 500-series chip
• SmartStart: add device to Z-Wave network by scanning supplied QR code
• OTA: Over-the-Air firmware updates via Z-Wave gateway
• Power metering: energy consumption reading supported
• Weekly programming: configurable through gateway/Z-Wave system
• Display: 7-segment LCD with backlight
• Power consumption: 1.5 W
• Safety/features: temperature limiter, slow start, open-window detection, lock/child lock, calibration
• Additional features: power controller, 8 scenarios
• Certification: CE
• Color options: Polar white (RAL 9010) and Graphite black (RAL 9011)

Installation method
Designed for use with electric heating systems; install in a standard flush-mounted back box and connect according to local electrical regulations. Use the supplied floor sensor for underfloor heating applications where required.

Package content

• Z-Wave thermostat MAGNUM Z-Wave
• Installation instructions
• Floor sensor (10K)

Warranty
2-year guarantee on electrical operation and floor sensor.