Mortar additive TC-LAX

MAIN DATA Synthetic rubber-based tackifier latex for cement-based mortar and adhesives. MAIN FEATURES High bonding performance APPEARANCE White liquid STORAGE 12 months in dry place, protected from freezing and high temperatures FIELDS OF USE Highly bonding adhesive Pour TECHNOS+ or TECHNOLA or TECHNO-XL powder into the latex. It is essential to use this mixture in the following cases: fixing tiles on old ceramic or stone floors, also outdoors fixing large, stable, natural stone tiles not affected by humidity, also on façades precast concrete or concrete cast on site. fixing tiles or natural stone not affected by humidity, to plasterboard. Use of Primer-T prior to fixing is not essential, but recommended. Adhesive cement-based mortars for repairing or leveling walls and floors Mortar formed by a mixture of cement and sand in 1:3, 1:4 ratios must be blended with the liquid obtained by diluting TC-LAX and water in 1:2 ratio (one part in volume and two parts of water). The sand grains should not be more than 2 mm in diameter. High performance screeds Blend mortar formed by cement and sand in 1:7 ratio with the liquid obtained by diluting TC-LAX in 1:3 ratio with water. The screed obtained with TC-LAX will be more consistent and will possess higher mechanical strength than one formed by using water alone. Adhesive cement grouting For casting joints or creating fixed screeds. The cement grouting is made by diluting TC-LAX in 1:1 ratio with water, and adding Portland cement to this solution to obtain paste that can be applied by brush. The mortar must be cast wet-on-wet.