|
|
|
Gira LED illumination provides more security and orientation both inside and outside. Gira offers a wide range of LED products and accessories adapted to the Gira switch ranges. The LED orientation lights and LED signal lights can be equipped with an inscription and symbols. A socket outlet with orientation light is also part of the product line.
|
|
New family of rectangular outdoor luminaires in two versions: flush floor-mounting (STEP IP67) and suspended-recessed mounting (STEP-AIR IP65) with the relevant accessories.
The STEP is a luminaire that can be stepped on and its rectangular shape permits the use of T5 and TC-L lamps with symmetric or asymmetric reflectors and bands of different-coloured LEDs. The STEP AIR is an elegant sealed luminaire which can be installed in continuous lines, as in the case of public transport stations, or affixed to columns and stakes for lighting passageways.
Recessed luminaire STEP. Body made of extrruded aluminium protected with poliester painting. Stainless steel frame and transparent tempered glass. Available for LEDs RGB.
|
|
VEGA MICRO
Lighting and signaling small HBLED recessed lighting fixture water proof IP67.
Various configurations for materials and shape: (aluminum, stainless steel 316L, marine quality, with a supplementary passivation treatment, Brass and copper).
Insulation class III.
Product supplied with 2x0.75 mm² cable 1m long.
Need of a separated converter power supply.
|
|
GEMINI 7 LED RECESSED
HBLED Recessed lighting fixture water proof IP67
Aluminium body with anodic protection; high transparency glass and high resistance (IK10), silicon sealing gasket for high temperatures, stainless steel tightening screws.
More materials and finishing for the closing disk (aluminium, 316L Stainless steel, brass, special painting any colour on demand).
Also available in specific colour on demand for monochrome version.
Static charges resistance: 1000Kg
Product supplied PVC reservation box and insertion collar.
DIRECTIONAL OPTIC
Directional optics +/- 11° with locking
Monochrome version, Insulation class I, (with integrated converter) supplied with 1m cable
RGB version, Insulation Class III, supplied with a 6x0.22mm² cable 3mt long and equipped of special connector to interface the other components of RGB piloting system.
FIXED OPTIC INTHE AXIS and very low dept.
Insulation class III
Monochrome version supplied with 1m cable
Need an external converter that can be placed in the reservation box.
RGB version supplied with a 6x0.22mm² cable 3mt long and equipped of special connector to interface the other components of RGB piloting system.
|
|
CORPO: In die-cast aluminium.
DIFFUSER: 5mm. thick, double glazing, clear, single-press tempered glass; resistant to thermal shock, impact and load (max. 2000 kg). Lens shaped.
PAINTING: Grey graphite epoxy-polyester powder applied; resistant to corrosion and briny mist.
STANDARD SUPPLY: Versions complete with clamping frame. Box for recess mounting supplied as standard.
EQUIPMENT: Silicone rubber gasket. Two Æ ½ inch gas thread f.g. nylon cable glands.
REGULATIONS: Manufactured according to applicable EN60598 - CEI 34-21 standards. Level of protection in compliance with the EN60529 standard
|
|
Luminous stud with diodes functioning on 12 or 24 Volts.
In option of the standard aluminum lid polished, we propose different from surface for our decorative beacon telegraphic SR-30:
- Nonpolished aluminum Lid
- Non-skid Lid
- Anodic Lid
- Nickelled Lid
Asset: Their consumption is low: it varies 0,72W with 2,88W according to the food (12 or 24V) and the number of leds.
Characteristics: Total height: 80 mm/Ø 143 Misters Matériaux: aluminum/polycarbonate. One-way 6 to 8 leds or bidirectional beaconing 2x6 leds or 2x8 leds. Fixed, flickering or sequential mode. Colors available: white, green, red, amber or blue.
|
|
5725 Alfort - Ground embedded projector size circular Ø 280 mm, equipped with Ledmodules (LMS) and stainless steel housing, offering various options:
Choice of colour: cold or warm white, blue, yellow/amber, red, green and quadrichromy.
Choice of optics: beam angle at 8°, 36° or 8x50°.
The proyector is orientable in rotation (60°) and in inclination (± 20°).
Optional control via DALI or DMX interface.
Classified IP67
Load up to max. 5000Kg
|
|
Recessed LED Ground Light Type AT756-WW
Unostentatious design yet high in functionality! That´s what we wanted to achieve with the developement of the recessed LED ground spotlight type AT756-WW. Of course only the newest LED technology was used throughout processing and the product incorporates all advantages LED technology has to offer.
Simply designed
The Recessed LED ground light AT756-WW is perfect for illuminating facades, paths and public places as well as for industrial uses. Needless to say our LED spot is entirely mantainance free and low in energy use.
Shapely
Its case is waterproof, stays dust-free and is entirely made out of aluminum. Covers are made from UV resistant polycarbonate and stainless steel. Upon request LED spot AT756-WW is also available in black.
|
|
La nouvelle ligne de signalisateurs dotée de la nouvelle technologie qui exploite la lumière froide d%u2019ampoules de type DEL étend la gamme des produits Martini. Série de luminaires pour intérieur et extérieur carrossables qui, grâce à la gamme de couleurs disponible, assurent à l%u2019architecture ou au paysage urbain la signalisation qui est leur fonction première, et qui enrichissent tout projet architectural en mettant en valeur, par le biais de différents faisceaux, les voies de cheminement ou qui, plus simplement, exalte l%u2019identité propre à un édifice.
Emissions:Diffuse
Power supply:
All these devices can be powered with 12V d.c., possibly stabilised. In the twelve-beam version, an electronic circuit inside the fixture guarantees stability of supply fluctuations and hence the length of the power supply cable has no influence on the beam of light emitted. The one and two-beam fixtures consume a little under 1W @ 12V, while the twelve-beam fixtures consume 3.6W @ 12V.
Body:
Domes made entirely in metal (sandblasted stainless steel and grey varnished aluminium also available) in the single-beam, two opposing beam and twelve beam versions, installable indoors or outdoors (IP68 protection level), they can be mounted on plasterboard or panel walls and on a solid wall (cement or brick) utilising the specific housing supplied as an accessory. The domes are secured with two screws supplied with the product. The stainless steel version, highly resistant to abrasion, can be driven over by lightweight vehicles (cars), while the aluminium version can be walked over.
|
|
Marker LED
Featuring SMD LEDs in combination with a diffusing glass cover, this luminaire is a clearly visible marker with a uniform light output, opening up a wide range of creative options and effects.
The robustly designed Marker LED is available in round, rectangular and square versions and has an easy to install wall and ground recessed mounting box.
|
|
The spotlights with LEDS find their place on a beach of ipé.
Avoided luminous key of a stainless body, these spotlights with low tension light the terrace of an ideal halation.
|
|
|
Cast aluminium body, phosphochromate treated and powder-painted. A4 stainless steel screws. AISI 316 stainless steel locking ring. PVC sleeve with fibreglass-reinforced nylon locking ring (to be ordered separately). 15 mm clear flat tempered glass cover. Installation in sleeve set in concrete, with a 20- 30 cm gravel drain bed. Fittings come with one or two 2/3 x 1 mm² or 2/3 x 1,5 mm2 H07RNF or silicone cables, 1.0 m in length.
|
|
CUT LED
Recessed luminaire for floor CUT LED, frame, in stainless steel, square, cover, in glass, matt, protection degree IP67, with 9 x Light emitting diode, red, with electronic transformer, L = 120mm, B = 120mm, EL = 110mm, EB = 110mm, ET = 122mm
|
|
The Uplight Flat series are recessed floor luminaries with high efficient LED lamps and high intensity discharge lamps, with bi-symmetrical light distribution, suitable for private and public buildings, walk-ways, parks, corridors passages and gardens.
The Uplight Square is a inground uplight with asymmetrical light distribution, designed for high intensity discharge lamps for flush mounting in reinforced surfaces, pathways and squares.
|
|
QUADRO & QUADRO MINI
HBLED Recessed lighting fixture water proof IP68 for installation wall, roof and ground and full immersion.
Body made of stainless steel 316L, marine quality, with a supplementary passivation treatment, extra transparent tempered glass, silicon sealing gasket.
Static charges resistance: : 500 Kg.
Fixed asymmetrical luminous beam
QUADRO: with integrated converter, Insulation class I, supplied with 3x1 mm² cable 1m long.
QUADRO FULL IMMERSION with integrated converter, Insulation class III, supplied with 2x0.75 mm² cable 3m long.
QUADRO MINI, without integrated converter, insulation class III, supplied with 2x0.75 mm² cable 1m long.
|
|
Rectangular Stealth
SSL/LED
Stealth is a compact 2.75" square recessed steplight for use with light emitting diodes (LED), or fiber optic lighting sources. The luminaire has a deeply regressed slot aperture to control glare and affords a discreet, elongated beam for step and walkway lighting applications. Stealth LED is powered by a single, 1w Light Emitting Diode and separate driver to illuminate up to 12 individual Stealth fixtures on a 350 or 233 milliamp circuit, up to 30 feet in overall length. The solid state design has a low current draw and uses a fraction of the power required by conventional light bulbs. With indicated useful LED life of 50,000+ hours, the fixture ensures minimal maintenance cost and is highly energy efficient. Stealth Fiber Optic relies on a remote illuminator to transmit light through fiber optic cables for up to 50 Stealth fixtures. The 100w metal halide lamp used in the illuminator has a 6,000 hour average life. The electrical cost of distributing light over this potential quantity of fixtures is exceedingly low, making Stealth Fiber Optic a highly energy efficient fixture. Since lamp replacement is accomplished at one point only, where the illuminator is located, Stealth Fiber Optic is also low maintenance. Both Stealth models are made of solid bronze and will endure the most demanding outdoor conditions without rust or interruption of fixture operation due to moisture.
|
|
|
Extruded aluminium body, cataphoresis treated and powder-painted. Cast aluminium locking rings. AINSI 316 stainless steel locking frame. A4 stainless steel screws. AINSI 304 stainless steel sleeve (to be ordered separately). Fittings equipped with HF ballasts. 8mm flat tempered glass cover. Installation in sleeve set in concrete, with a 20-30 cm gravel drain bed. Versions for other types of lamps are available on request.
|
|
|
Cast aluminium body, phosphochromate treated and powder-painted in grey Coron. Cast aluminium locking ring. A4 stainless steel screws. Flame-retardant polypropylene sleeve. 5 mm flat sanded tempered glass cover. Versions for other types of lamps are available on request.
|
|
|
AGORA': wall recessed fixture for TC-D fluorescent lamps.
|
|
Adapted to the ways circulated with a regular passage of vehicles. It is generally used to mark out the edges of roads, passages pedestrians, tracks cycle, carparks It is equipped with a condenser (twinkling diodes only) or with a refillable battery for a higher luminous power with fixed diodes (lifespan average 5 years).
Assets: easy maintenance without excavation of the base sealed in the ground. Its lid resembles a traditional nail of roadway and is available in several versions (aluminum polished, aluminum nonpolished, non-skid, anodic aluminum).
Characteristics: Ø 143 mm/Height 80 Misters Saillie except roadway: 3 mm at the ends, 10 mm in the center. Materials: aluminum, polycarbonate, single-crystal silicon. Pressure resistance: 20 tons minimum. Plain or bidirectional, fixed beaconing or indicator, 1 to 2 leds by side. Colors available: blue, white, green, red, amber
|
|
Dimensions:
FCSL108 - 9-1/2"W x 3-1/8"H
Exterior die cast brick light with 316 stainless steel faceplate for masonry applications.
Marine grade corrosion resistant heavy walled high pressure die cast aluminum construction, with (2) 7/8" knockouts and 316 stainless steel faceplate.
|
|
Dimensions:
11-7/8"W x 4-3/8"H
Exterior die cast midsize steplight with 316 stainless steel faceplate for masonry applications.
Marine grade corrosion resistant heavy walled high pressure die cast aluminum construction, with (2) 7/8" knockouts and 316 stainless steel faceplate.
|
|
Dimensions:
9-1/2"W x 2-13/16"H
Exterior die cast brick light with die cast faceplate for masonry applications.
Marine grade corrosion resistant heavy walled high pressure die cast aluminum construction, with (2) 7/8" knockouts.
|
|
Dimensions:
6" Dia Housing 7" Dia Faceplate
Exterior die cast round step light with stainless steel faceplate for masonry applications.
Marine grade corrosion resistant heavy walled high pressure die cast aluminum construction. Two 7/8" knockouts for through wiring.
|
|
Dimensions:
11-7/8" W x 4-3/8 H
Exterior die cast midsize steplight with die cast faceplate for masonry applications.
Marine grade corrosion resistant heavy walled high pressure die cast aluminum construction, with (2) 7/8" knockouts.
|
|
Dimensions:
11-3/4" W x 13-3/4" H
Exterior die cast steplight with die cast faceplate for masonry applications.
Marine grade corrosion resistant heavy walled high pressure die cast aluminum construction with (2) 7/8" knockouts.
|
|
Dimensions: 11-7/8" W x 4-3/8" H
Exterior die cast midsize step light with die cast faceplate for masonry applications.
Marine grade corrosion resistant heavy walled high pressure die cast aluminum construction, with (2) 7/8" knockouts.
|
|
Dimensions:
8-11/16 W x 9-1/2 H
Exterior die cast steplight with die cast faceplate for masonry applications.
Marine grade corrosion resistant heavy walled high pressure die cast aluminum construction with (2) 7/8" knockouts.
|
|
|
|
Urban lighting: recessed lights
