|
|
BEGA Light building element
Protection class IP 65
· for discharge lamps HIT-CE
Die cast aluminium, aluminium and stainless steel
Safety glass
Reflector of pure anodized aluminium
Door and connection box 632
Anchorage section made of galvanized steel is an
integral part of the luminaire
On request, we supply mounting base 829 for
bolting to a foundation without extra charge.
|
|
Drive-over in-ground floodlights
Floodlights · Symmetrical
Protection class IP 67
Pressure load 5000 kg
Installation depth 190 - 330 mm
· for low voltage tungsten halogen lamps QT 12-ax
· for high voltage tungsten halogen lamps QT 32
· for discharge lamps HIT-CE · HIT-TC-CE
· for discharge lamps HI/HST-DE
· for discharge lamps HME
8617 - Lampholder GU 6.5
Cover ring made of stainless steel
Luminaire housing and installation housing made of aluminium
Clear safety glass
Reflector of pure anodized aluminium
|
|
Drive-over in-ground floodlights
Floodlights
Protection class IP 68 10 m · Safety class I
8042 · 8058 Safety class III
Pressure load 2000 kg
Installation depth 95 - 160 mm
· for low voltage tungsten halogen lamps QT 9-ax
Cast stainless steel and stainless steel
Clear safety glass with built-in louvre
Reflector of pure anodized aluminium
|
|
Catalog #:IFS70
Description:Indoor/Outdoor Step Light
Lamp:9W TT 2-pin / 13/18/26W DTT 4-pin
Ballast:Electronic 120/277V
Listings:NRTL
|
|
Cast aluminum body injected, with external cooling ribs.
Closing by tempered clearly or dulled glass of 15 mm, with non-skid pastilles,
in cast aluminum flange injected.
Parabolic out of aluminum, adjustable optics in orientation and slope with
angular blocking (patented system).
Pot of embedding out of cast aluminum injected, thermal drainage by
assembly of wings between the projector and the pot (patented system).
Installation built-in projector, or separated in box equipment hedgehog (IP67)
in extruded section of aluminum with cooling ribs and connector likely to be stripped.
Delivered prewired.
Gray Thermolaquage clouded 9770 Futura.
Accessories optics: filter striated or asymmetrical (20°), dichroic or enamelled filters
color, filters correct.
Accessories comfort: grill honeycomb and grill with plate 180°.
Accessory poses: square flagstone 275 X 275 Misters.
|
|
A ground recessed floodlight designed specifically for decorative lighting effects, ideal for paved, concrete or grassed areas where raised lighting would be too obtrusive.
Choice of symmetric or asymmetric reflectors
Wide variety of attachments : Filters - red, blue, yellow and green Grilles - 2 options for directional lighting, 45° and vertical
2 sizes for a discrete integration
Choice of lenses - clear and opal
3 light sources - high pressure sodium, metal halide, or fluorescent
Low temperature versions available
|
|
ECO 100 E Marks out solar encastrable
Our decorative paving stones solar ECO100E are used to mark out and illuminate the places, terraces, patios, rises of staircases, alleys, footpaths, edges of fountain.
Completely autonomous, our solar luminous paving stones can replace the traditional telegraphic systems on the sites slightly enlightened (possibility of carrying out a play of lights with diodes of various colors).
Asset: 100% autonomous
Characteristics: 100 X 100 X 45 Misters Saillie except ground: null. Materials: aluminum, polycarbonate. Vertical, fixed beaconing or indicator, 1 led with diffuser. Colors available: white, green, red, amber or blue.
|
|
Solar ECO84E Stud of edge to be embedded
Not adapted on roadway, it is used to mark out the edges of gyratory, small islands, obstacles, pavements. It is equipped with a refillable battery for a higher luminous power (lifespan average = 5 years), of a diode directed to the top and of 4 reflectors.
Assets: null projection (except central lens of 7 mm). It is about the embedded stud of edge most powerful of our range in fixed beaconing.
Characteristics: Ø 84 mm/Height 25 Misters Saillie except roadway: 3 Misters Matériaux: polycarbonate, single-crystal silicon. Vertical beaconing, fixes, 1 led. Twinkling diode on request. Color available: white (standard), another color on request.
|
|
Luminous stud with diodes functioning on 12 or 24 Volts.
In option of the standard aluminum lid polished, we propose different from surface for our decorative beacon telegraphic SR-30:
- Nonpolished aluminum Lid
- Non-skid Lid
- Anodic Lid
- Nickelled Lid
Asset: Their consumption is low: it varies 0,72W with 2,88W according to the food (12 or 24V) and the number of leds.
Characteristics: Total height: 80 mm/Ø 143 Misters Matériaux: aluminum/polycarbonate. One-way 6 to 8 leds or bidirectional beaconing 2x6 leds or 2x8 leds. Fixed, flickering or sequential mode. Colors available: white, green, red, amber or blue.
|
|
|
The Gira LED illumination enables the targeted use of lighting accents. For instance it is used to illuminate stairs and dark corridors or outdoor pathways and therefore provides extra safety for walking and for orientation both inside and outside. Gira offers a wide range of LED products and accessories adapted to the its switch ranges. Pictograms and inscriptions allow LED lights to be expanded to illuminate information signs which can be used in a multitude of ways. The LED technology used in our products ensures durability and economical power consumption
|
|
New family of rectangular outdoor luminaires in two versions: flush floor-mounting (STEP IP67) and suspended-recessed mounting (STEP-AIR IP65) with the relevant accessories.
The STEP is a luminaire that can be stepped on and its rectangular shape permits the use of T5 and TC-L lamps with symmetric or asymmetric reflectors and bands of different-coloured LEDs. The STEP AIR is an elegant sealed luminaire which can be installed in continuous lines, as in the case of public transport stations, or affixed to columns and stakes for lighting passageways.
Recessed luminaire STEP. Body made of extrruded aluminium protected with poliester painting. Stainless steel frame and transparent tempered glass. Available for LEDs RGB.
|
|
|
|
|
|
GEMINI LED RECESSED
HBLED Recessed lighting fixture water proof IP67
Aluminium body with anodic protection (65mm depth) ; high transparency glass and high resistance (IK10), silicon sealing gasket for high temperatures, stainless steel tightening screws.
More materials and finishing for the closing disk (aluminium, 316L Stainless steel, brass, special painting any colour on demand).
Also available in specific colour on demand for monochrome version.
Static load resistance: 1500Kg
Product supplied PVC reservation box and insertion collar.
DIRECTIONAL OPTIC
Directional optics +/- 15° with locking
Monochrome version, Insulation class III, Converter and IP68 kit supplied, with 1m cable length
RGB version, Insulation Class III, supplied with a 6x0.22mm² cable 3m length and equipped of special connector to interface the other components of RGB piloting system.
FIXED OPTIC
Insulation class III
Monochrome version supplied with 1m cable
Need an external converter that can be placed in the reservation box.
RGB version supplied with a 6x0.22mm² cable 3m length and equipped of special connector to interface the other components of RGB piloting system.
|
|
VEGA MICRO
Lighting and signaling small HBLED recessed lighting fixture water proof IP67.
Various configurations for materials and shape: (aluminum, stainless steel 316L, marine quality, with a supplementary passivation treatment, Brass and copper).
Insulation class III.
Product supplied with 2x0.75 mm² cable 1m long.
Need of a separated converter power supply.
|
|
|
Mini embedded spot, ground or mural, with LED 1W high power 350mA, monochromic, for the lighting of stressing and beaconing. 2 focal distances: 70° and 120°. Fixing by direct sealing in all supports of the aluminium body. Flange stainless 316L and clearly soaked glass of 5mm thickness for the reliable use in public places.
|
|
|
LED screens from ground mounting applications will be a new opportunity for the professional lighting designers, thanks to GRAPH-i-Dune. Many areas, including pedestrian zones, will be inset with a compact full-colour solid state lighting unit, covered by a glazed glass, which will create, assembled in combination with other units of its kind, virtual in ground screens for image projection or colour changing effect. Featuring an IP67 weather protection rating as well as a DMX addressing automatic assignment, GRAPH-i-Dune can easily blend in any sort of outdoor or indoor floor, shaping a brand new outstanding graphic, pattern, video or image ambience. Whereas light, colour and visual concept converge to create a dynamic, extraordinary, brilliant lighting performance, the new artistic medium for eye-catching display will be GRAPH-i-Dune.
|
|
CUT LED
Recessed luminaire for floor CUT LED, frame, in stainless steel, square, cover, in glass, matt, protection degree IP67, with 9 x Light emitting diode, red, with electronic transformer, L = 120mm, B = 120mm, EL = 110mm, EB = 110mm, ET = 122mm
|
|
|
36x1,2 W LED colour changer with RGB system for underground installation, carriageable, driveable with DMX 512-A signal. 5 DMX channels, strobe and rainbow effects at adjustable speed.
|
|
CORPO: In die-cast aluminium.
DIFFUSER: 5mm. thick, double glazing, clear, single-press tempered glass; resistant to thermal shock, impact and load (max. 2000 kg). Lens shaped.
PAINTING: Grey graphite epoxy-polyester powder applied; resistant to corrosion and briny mist.
STANDARD SUPPLY: Versions complete with clamping frame. Box for recess mounting supplied as standard.
EQUIPMENT: Silicone rubber gasket. Two Æ ½ inch gas thread f.g. nylon cable glands.
REGULATIONS: Manufactured according to applicable EN60598 - CEI 34-21 standards. Level of protection in compliance with the EN60529 standard
|
|
Recessed LED Ground Light Type AT756-WW
Unostentatious design yet high in functionality! That´s what we wanted to achieve with the developement of the recessed LED ground spotlight type AT756-WW. Of course only the newest LED technology was used throughout processing and the product incorporates all advantages LED technology has to offer.
Simply designed
The Recessed LED ground light AT756-WW is perfect for illuminating facades, paths and public places as well as for industrial uses. Needless to say our LED spot is entirely mantainance free and low in energy use.
Shapely
Its case is waterproof, stays dust-free and is entirely made out of aluminum. Covers are made from UV resistant polycarbonate and stainless steel. Upon request LED spot AT756-WW is also available in black.
|
|
|
Cast aluminium body, phosphochromate treated and powder-painted. A4 stainless steel screws. AISI 316 stainless steel locking ring. PVC sleeve with fibreglass-reinforced nylon locking ring (to be ordered separately). 15 mm clear flat tempered glass cover. Installation in sleeve set in concrete, with a 20- 30 cm gravel drain bed. Fittings come with one or two 2/3 x 1 mm² or 2/3 x 1,5 mm2 H07RNF or silicone cables, 1.0 m in length.
|
|
|
The Kalank Mini Led is as easy to install as a socket or a switch. No dedicated postion. Only one screw is used to fix it in the specific recessed box. Accessories exist to fix in a standard recessed box, in dry partition and wood, and also for another esthetical aspect with a round and square front. Direct or direct/indirect lighting. 5 colors of LED available.
|
|
QUADRO & QUADRO MINI
HBLED Recessed lighting fixture water proof IP68 for installation wall, roof and ground and full immersion.
Body made of stainless steel 316L, marine quality, with a supplementary passivation treatment, extra transparent tempered glass, silicon sealing gasket.
Static charges resistance: : 500 Kg.
Fixed asymmetrical luminous beam
QUADRO: with integrated converter, Insulation class I, supplied with 3x1 mm² cable 1m long.
QUADRO FULL IMMERSION with integrated converter, Insulation class III, supplied with 2x0.75 mm² cable 3m long.
QUADRO MINI, without integrated converter, insulation class III, supplied with 2x0.75 mm² cable 1m long.
|
|
In-grade adjustable w/ clear glass - low surface temperature
Designed for up lighting trees, flags, walls, columns, signage and other interior and exterior locations featuring low surface temperature lens.
Flush in-grade luminaires with adjustable lamp enclosure for symmetrical or asymmetrical light distributions. Clear tempered glass.
U.L. listed, suitable for wet locations.
Protection class: IP 67
Finish: Machined #4 stainless steel.
|
|
|
AGORA': wall recessed fixture for TC-D fluorescent lamps.
|
|
|
AGORA': wall recessed fixture for TC-D fluorescent lamps.
|
|
LED equipment on 12V power supply (included)
Classe 3 / IP20
4 or 8 LED equipment
LED Colour : White, Blue or Amber.
850°C Glow wire test
|
|
available colour: INOX 228 471 01 10 INOX
fixation: WALL RECESSED MOUNTED
lamptype :
lamp : 1 x QR-CBC51 - GX5.3 - 35 W (max)
voltage : 12V
control gear : EXCL.TRANSFO
class: III
protection class: IP67
norm: CE - CEBEC
distance: 0,5 m
netto weight: 1.4 kg
cutout: 149 x 149 mm
min depth for recessing: 145 mm
|
|
|
Extruded aluminium body, cataphoresis treated and powder-painted. Cast aluminium locking rings. AINSI 316 stainless steel locking frame. A4 stainless steel screws. AINSI 304 stainless steel sleeve (to be ordered separately). Fittings equipped with HF ballasts. 8mm flat tempered glass cover. Installation in sleeve set in concrete, with a 20-30 cm gravel drain bed. Versions for other types of lamps are available on request.
|
|
|
Cast aluminium body, phosphochromate treated and powder-painted in grey Coron. Cast aluminium locking ring. A4 stainless steel screws. Flame-retardant polypropylene sleeve. 5 mm flat sanded tempered glass cover. Versions for other types of lamps are available on request.
|
|
|
|
Urban lighting: recessed lights
