|
|
Recessed luminaires
unshielded light
Protection class IP 65
· for fluorescent lamps TC-S
· for incandescent lamps CO 26
Cover frame made of stainless steel
Die cast aluminium housing
White safety glass
|
|
Adapted to the ways circulated with a regular passage of vehicles. It is generally used to mark out the edges of roads, passages pedestrians, tracks cycle, carparks It is equipped with a condenser (twinkling diodes only) or with a refillable battery for a higher luminous power with fixed diodes (lifespan average 5 years).
Assets: easy maintenance without excavation of the base sealed in the ground. Its lid resembles a traditional nail of roadway and is available in several versions (aluminum polished, aluminum nonpolished, non-skid, anodic aluminum).
Characteristics: Ø 143 mm/Height 80 Misters Saillie except roadway: 3 mm at the ends, 10 mm in the center. Materials: aluminum, polycarbonate, single-crystal silicon. Pressure resistance: 20 tons minimum. Plain or bidirectional, fixed beaconing or indicator, 1 to 2 leds by side. Colors available: blue, white, green, red, amber
|
|
Dimensions:
FCSL105 - 9-1/2"L x 2-13/16"W x 2-7/8"D
|
|
Dimensions:
11-9/16"L x 4-3/8"W x 2-5/8"D
Heavy wall die-cast recessed housing and face, fully gasketed, stainless steel hardware, UL listed electrical components.
|
|
Dimensions:
11-7/8"L x 4-3/8"W x 2-5/8"D
Heavy wall die-cast recessed housing and face, fully gasketed, stainless steel hardware, UL listed electrical components.
|
|
Dimensions:
11-3/4"W x 13-3/4"H x 5-1/2"D
Heavy wall die-cast recessed housing and face, fully gasketed, stainless steel hardware, UL listed electrical components.
|
|
Dimensions:
11-9/16"W x 4-3/8"H x2-5/8"D
Heavy wall die-cast recessed housing with stainless steel face, fully gasketed, stainless steel hardware, UL listed electrical components.
|
|
Dimensions:
9-3/8"W x 2-5/8"H x 2-7/8"D
Heavy wall die-cast recessed housing with stainless steel face, fully gasketed, stainless steel hardware, UL listed electrical components.
|
|
Dimensions:
8-11/16"W x 9-1/2"H x 3-1/2"D
Heavy wall die-cast recessed housing and face, fully gasketed, stainless steel hardware, UL listed electrical components.
|
|
|
Trespass Round polished stainless steel floor lights feature an ultra slim fascia profile of only 2mm. The luminaires are designed to accept Low Voltage Halogen lamps with a maximum wattage of 20w and a minimum beam width of 36o. A quality electronic dimmable transformer with short, overload and thermal protection is pre-wired for ease of installation. Tamper proof screws provide security. Supplied complete with clips for cavity wall mounting. The luminaires are IP54 rated from the fascia side.
|
|
Housing: Spun copper, bronze clamping ring, prewired cord through brass seal.
Lens: Convex tempered clear glass with silicone gasket
Socket: Porcelain medium base.
Well: 9' diameter x 14%' depth direct burial PVC pipe.
Louver: Cast aluminum finished black with polished edges, secured to well with socket head set screws. Slot sizes allow light and drainage, and prohibit litter from collecting in the well, however, not recommended lor pedestrian or walkover traffic.
Junction Box: Die-cast brass, W rigid conduit and brass seal (or (ixture cord, two W NPT conduit entries in sides, one W NPT conduit entry in bottom. 21 cu. in. volume.
|
|
LED Technology in a die cast aluminum Step Light fixture. It has three different cover types (Prism, Scoop & Louver) to choose from, four colors for cover (Aluminum, Bronze, White & Black) and six LED colors (Cool White, Warm White, Blue, Pure Green, Amber & Red)
- Use quality High Power LED, which is 10 times brighter than
- traditional LED.
- Wide lighting angle with soft mild lighting effect.
- Excellent heat dissipation system which ensure lighting
- fixture's surface temperature remain at a safe low degree.
- Ultra low 4 watt per fixture
- Louver, Scoop & Prism cover designs
- White, Bronze, Black and Aluminum colors
- Die cast aluminum design suitable for concrete pour
|
|
|
Orientation lights for installation in walls and floors/ground, for example for path marking and illumination, in underground garages, entrance halls and in open spaces, as part of building control systems and also for accented decorative lighting. Various designs are available with different types of equipment, including LEDs, compact fluorescent tubes or halogen light sources. The robust models feature a stainless steel housing and a stainless steel cover in conjunction with an LED, offering durability, safety and reliability even with high levels of pedestrian traffic.
|
|
Prescolite LiteStep is a family of commercial step and aisle lights
for interior and exterior applications. Offered in a wide array of
housing, lamp types, faceplates and upgrade options, LiteStep is
designed for long-lasting efficient operation.
|
|
| ... products without information |
| |
|
|
Urban lighting: recessed lights
