Access hatches

Length: 29 cm - 33 cm

... are included with the panel. Entirely made of stainless steel, the B-Fix Inspection Panel allows to easily create an access hatch. Thanks to its frame and sliding rafters, it can be adapted to all ...

Thickness: 38 mm

Ensamblada meter door is manufactured in 1 leaf and has the same internal characteristics that the Ensamblada door. The leaf is assembled without welding, with two 0.5mm steel plates, forming a leaf thickness of 38mm. Its frame ...

Length: 203 mm - 1,219 mm
Width: 203 mm - 1,219 mm

... This cylinder locking device provides keyed access from the outside of the door. The night latch also has a small thumb latch that allows the spring latch to remain in a retracted position, which allows access ...

• Z275 zinc-plated sheet steel, white covering (RAL 9016) • Hidden catches • Opening system: push/release • Removable door panel • Quick and easy assembly • Secure fixing with wall anchors • Available in square closure • ...

Area: Internal and external hatch/shutter Fire class: El260/E240 DETAILED INFORMATION Hinged or without hinges Produced from galvanized steel Steel thickness 1,0 mm Doorleaf thickness 62 mm Z-frame FINISHING ...

GRG Access Doors made from glass reinforced gypsum are designed specifically for use with drywall suspension ceilings. An alternate to bulky metal doors, GRG Access Doors are taped and finished to integrate ...

The hatch doors of the audit are intended to access hidden controls and equipment; Made from ABS plastic; Possible wall and ceiling mounting; Equipped with a handle;

Length: 300, 400, 600, 1,200 mm
Width: 300, 400, 600 mm

... integrated Troldtekt access panel provides easy access to “hidden services” above the ceiling. As the access panel is integrated into a Troldtekt acoustic panel, it has the same visual ...

Galvanized steel cover with hydraulic seal, intended to cover the wells and water reservoirs. FEATURES: Trapdoor made of galvanized steel; Type of steel: DX51D + Z275 IN Thickness: 1.5 mm According to: NP EN 124 Hot dip galvanizing ...

Product Code: 01.2001.3 Steel faced door, compatible with standard stainless steel washroom units and accessories ensuring continuity of design Finish: Satin Stainless Steel

4 sided or 3 sided frame, made in high resistance steel of 1,2mm. thickness, provided with anchors and holes for fixiation. Leaves 4 sided or 3 sided, of thickness 53mm (EI2-60) or thickness 63mm. (EI2-90 y EI2-120) 4 sided or 3 sided, ...

Length: 152 mm - 762 mm
Width: 152 mm - 610 mm

... • One piece trim flange will not rack, sag or distortion • Unique continuous concealed hinge will not bind UF-5000 Access Door Specifications: Material: Up to 16” X 16” - 16 gauge, 18 gauge mounting frame, ...

Intro Designed to fit into any type of ceiling system, allowing easy access into the cavity/void where regular maintenance to services is required to be carried out. Description This panel is designed to fit into the ...

Flush installation in new cast-in-concrete applications. The heavy-duty angle frame floor access door is designed for interior and exterior applications where water tightness is not required. It is designed for off-street ...

Length: 400 mm
Width: 400 mm

... heat-resistant up to 600°C. Application: Inspection doors are installed wherever access must be guaranteed for maintenance and inspection. They are fitted to close off maintenance access openings ...

... inspection hatches can be equipped with the same colour and type of surface as the Jansen Systembau wall and ceiling panels. Additionally the inspection hatches can be fitted with or without a visible ...

Door closing system for false ceilings , inspection service shafts and technical shafts . This system è consisting of three elements: minimal built-in frame, opening door equipped with hinges and Push-Pull closing element which allows ...

Length: 700 mm - 1,750 mm
Width: 500 mm - 1,000 mm
Thickness: 64 mm

Novoferm’s NovoPorta Premio wall flaps with high quality thick rebate are available in fire resistant classes T30 (EI2 30) and T90 (EI2 90) for indoor use. YOUR ADVANTAGES AT A GLANCE! Single leaf fire resistant steel wall flaps for ...

Length: 230 mm - 630 mm
Width: 230 mm - 630 mm

Length: 600 mm
Width: 600 mm
Thickness: 13 mm

Provide discrete access to services within Gyptone Sixto 63 ceilings. This access hatch creates virtually invisible access to services in Gyptone ceilings while maintaining acoustic ...

Length: 73, 55 cm
Width: 45 cm

... 45 x 73 cm QUANTITY PER PALLET Quantity per pallet 80 x 120 15 hatches MDM® ROOF HATCH 45 X 55 CM Double-glazed outer tempered glass DIMENSIONS Outer window frame dimensions: width x height ...

Length: 100 mm - 1,200 mm
Width: 100 mm - 1,200 mm

... effectively prevents rainwater, snow, leaves, animals and other objects from entering into ductwork. Halton’s Weather Tight Hatch can be used as a cover for droplet separators and outdoor louvers. WTH is designed for ...

... To secure these openings, we propose several models of floor hatch with automatic closure after the user has passed through: • Hinged composite material duckboard hatch • Sliding hatch ...

Length: 24 in
Width: 24 in

The Panel Rey access panels are ideal for placing on ceilings and walls, where it is required to have continuous access to electrical, plumbing, air conditioning controls, or any other type of installation, ...