Textured cladding

Thickness: 13 mm

Warped: custom-made facade solution from Rieder formparts made of fibreC glassfiber reinforced concrete are monolithic concrete slats which offer a high degree of flexibility and various design options for innovative building envelopes. ...

The sturdy panels, only 13 mm thin, open up a great freedom for the design of individual facades. Concrete skin pulls smoothly over buildings, corners and edges like a skin and creates a unique material flow.

The development of glassfibre reinforced concrete was inspired by Rieder’s vision of a concrete cladding panel that is both stable and lightweight. The aesthetic panels with only 13 mm thickness in various colours, surfaces ...

... weathered iron-grey of a meteorite and the crisp silver-white of quartzite. ALUCOBOND® rocca features a unique, perceptibly textured structure where light is broken up naturally into the widest range of shades. Depending ...

ALUCOBOND® legno composite panels are real natural beauties: four different wood look finishes showcase wood at its most exclusive and a special coating adds a grainy structured feel to the surface. It makes the lively wood decors even ...

... with a particularly wide range of colours and large depth of colour; but it is also suitable for the realisation of contours, 3D effects or very individual design requirements. Of course, the range also includes metal ...

... with a dual-layer thermoset polyester paint of 35μm thickness polymerized at high temperature. The surface of the finely textured paint diffuses the light for a very matte visual effect, while retaining the appearance ...

Gascogne® is a system of siding made of pre-painted steel. Due to its repetitive sequences, rises and depths, Gascogne® enables an architecture based on the rhythms of light Validated by CSTB, according "Cahier N°3747 May 2014". Gascogne® ...

Pulsation is a siding with specific design made of pre-painted steel, stainless steel or aluminum. Its symmetrical fold forms a visual concept in its own right: the relief and depth of field ensure an unequalled play of light and shadow. ...

Weight: appr. 10,2 kg/m² (2,09 lbs/sqft) Open area: apprx. 46% Main application: Façade, Ceiling, Wall, Balustrade, Sun protection • Dense mesh with low transparency. • Due to its flexibility it can be curved to a small radius. • ...

Weight: appr. 6,2 kg/m² (1,27 lbs/sqft) Open area: appr. 52% Main applications: Façade, Ceiling, Wall, Balustrade infill, Sun protection, acoustics • Good stability due the rectangular opening and the utilized wires. • The flat surface ...

Weight: appr. 5,3 kg/m² (1,09 lbs/sqft) Open area: appr. 52% Main applications: Façade, Ceiling, Wall, Balustrade, Sun Protection • With corresponding illumination the structure of DOKAWELL-MONO creates single light reflection points ...

SOTTILE is an innovative line of last generation ceramic materials and includes fully vitrified porcelain stoneware slabs characterised by a reduced thickness of only 4.9 mm. Designed and manufactured according to the existing laws regarding ...

... reacts to the atmospheric agents, the sun and the passage of time. The material and chromatic depths help create new refined 3D effects for a total look in designing interiors and exteriors in any style, from the most ...

... its simple maintenance and extreme durability. Laminam slabs that reproduce stone, marble and wood present in nature, textured effects, concrete, plaster, oxides or three-dimensional, making surface aesthetics a plus ...

... living room and large kitchen, while the bedrooms are found on the second floor. On the outside, the materials used for the cladding combine to create overlapping and contrasting effects. Large sized oxidised metal-effect ...

... weathering structural steel cannot be applied, Granite® Impression Patina is the alternative for creating façade and roof cladding profiles, and sandwich panels, in harsh industrial, marine, or coastal environments. Granite® ...

Indaten® weathering steel evolves with its environment, changing and developing on a daily basis - always improving, always protecting. no painting or chemicals necessary to protect the material beautiful and ever-changing appearance ...

Granite® Impression Wood offers natural wood appearance and attractive finishes for a range of constructions and details. There is a generous palette of wood grain textures, which have been thoroughly tested to the highest standards. ...

Curved wall The linear wall system is also suitable for curved or arched applications. These can be applications in which the walls are curved or where they flow smoothly into the ceilings. The architect's creativity is the guiding principle ...

Length: 310 mm - 1,810 mm
Height: 200 mm - 600 mm
Thickness: 30 mm

Piterak Slim is a 30mm thick, double-skin terracotta rainscreen cladding system with overlapping horizontal reveals. The system contains a large module terracotta panel available in a variety of standard sizes and a multitude ...

Product exclusively marketed to professionals. If you are a private individual, we invite you to contact your nearest retailer. / Bespoke product / Unparalleled durability of terracotta / Offers complete freedom for the imagination / ...

Country / Place: CH/Gossau Name of Project: Multiple Dwellings Neuring Gossau Product Category: - - Back Ventilated Facade Material: - - CELLON®, 8mm Colour: - - NCS S 5005-Y20R Architect/Planner: - - Daniel Cavelti Architektur ...

Thickness: 21 mm - 45 mm

Barrow is made from reclaimed hardwoods from Kalimantan. It’s our first line suitable for outdoor spaces. Yep, Barrow can take a hit or two from Mother Earth. Those who do use it for the outdoors will be awarded a beautiful silver-gray ...

Stylish & strong fibre cement cladding If you’re looking for a versatile, low maintenance weatherboard with a natural and beautiful texture, look no further than HardiePlank® fibre cement cladding. It’s ...

... looks to make heads turn, HardiePanel® cladding offers you the best of both worlds. Build with confidence knowing that HardiePanel cladding will leave a lasting impression. HardiePanel is a large element ...

Thickness: 1 mm

Material : Galvanised steel Thickness : 0,75 mm Usable width : 800 mm

Thickness: 1 mm

Material : Galvanised steel Thickness : 0,75 mm Usable width : 800 mm

Thickness: 1 mm

Material : Galvanised steel Thickness : 0,75 mm Usable width : 800 mm

Europerfil CRETA architectural metal profile (3.340.60). Nerve height 60 mm, useful width 1020 mm, and thickness from 0.75 mm to 1.20 mm. Galvanised and pre-lacquered steel (as per XP P 34.301 and EN 10169) in standard Europerfil colours ...

Our newest series. Similar depth as Type A – these can be combined to form a board wall – with varying and different widths: 30 – 60 – 90 – 120 – 150mm.

If regularity is NOT your thing! Then this series, with its irregular character, will definitely appeal to you. With combinations of block corrugations: 30×20 mm / 40×40 mm / 60×30 mm / 80×30 mm.

Fins that exude a timeless elegance and refined look. The perfect choice for anyone aiming for an exclusive look. U-shape of 30x25mm.

Length: 500 mm - 6,000 mm
Height: 1,000 mm - 1,500 mm
Thickness: 1 mm - 2 mm

Length: 500 mm - 6,000 mm
Height: 1,000 mm - 1,500 mm
Thickness: 1 mm - 2 mm

Length: 500 mm - 6,000 mm
Height: 1,000 mm - 1,500 mm
Thickness: 1 mm - 2 mm

... without heavy metals or CMR substances. Its highlights and textured “skin” make MIRABUILD® ideal for the specific requirements of contemporary architecture. MIRABUILD ® comes in a range of textured ...

With over 600 materials of natural stone from 5 continents including some available exclusively through us our block and slab stock storage offers a huge showcase of opportunities. Architects, builders and designers can delve into ...

... overall cost of the building cladding. BRAVO has been properly dimensioned to withstand stresses and wind loads anticipated on a regular building. The back ventilated cavity which is formed between the façade cladding ...

Omega cassette system is a simple and efficient cladding system, incorporating etalbond® cassettes using the hanging technique, assuring fast and easy installation. Optimal for large and flat vertical layout.

The system is specially designed for mounting etalbond® and it offers easy, fast and secure mounting of the flat sheets. The system exhibits optimal behavior regarding the thermal expansion of the composite panels

... Ceiling and Pitched roof Light alloy cladding panels, used to renovate building envelopes, rendering them more attractive. The use of this ventilated façade system — with or without the integrated insulation cladding ...