{{product.productLabel}} {{product.model}}
{{#if product.featureValues}}{{product.productPrice.formattedPrice}} {{#if product.productPrice.priceType === "PRICE_RANGE" }} - {{product.productPrice.formattedPriceMax}} {{/if}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{product.productLabel}} {{product.model}}
{{#if product.featureValues}}{{product.productPrice.formattedPrice}} {{#if product.productPrice.priceType === "PRICE_RANGE" }} - {{product.productPrice.formattedPriceMax}} {{/if}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
Thickness: 70 mm - 70 mm
... Product overview
Extruded
aluminium profile with a 170 mm slat step designed to visually match the acoustic versions L.170ACS.01 and L.170ACL.01 on the front façade. The dummy blind provides visual continuity where acoustic ...
RENSON
Thickness: 55 mm - 55 mm
... Product description
Extruded
aluminium louvre profile designed for minimal airflow resistance. Suitable for applications requiring high airflow combined with high water resistance. Recommended solution for air discharge applications.
...
RENSON
Thickness: 61.5 mm
... Description
Extruded V-shaped
aluminium profile with a lamella pitch of 66 mm. Applicable where free inlet area is required, such as in high-voltage cabins, for visual screening and where good water resistance is needed. For ...
RENSON
Length: 5 cm
Thickness: 130 mm
... Product overview
The patented Linius L.050WV ventilated façade louvre is an external
cladding system designed for architectural façades. It uses water-repellent blades with a 50 mm pitch (tested to EN13030:2001 class A2 up to ...
RENSON
Thickness: 41 mm
... Product description
Extruded
aluminium profile with a 50 mm slat pitch. These solid closure slats are designed for aesthetic applications where ventilation is not required and to prevent visibility through the façade. Can be ...
RENSON
Height: 3 cm
Thickness: 20.4 mm
... with: L.033.01 (standard slat), L.033IM1 (perforated slat)
RENSON
... Extruded aluminium profile for light duty with a 33.3 mm pitch. Normally used for smaller surface areas, round and special shapes. Materials Aluminium extrusion, alloy EN AW 6063 T66 Finish - Anodised (20 micron) - ...
RENSON
... Extruded aluminium profile with integrated insect mesh. This 33.3 mm pitch blade clipped into the standard blade support combines weather resistance and insect protection. No separate insect mesh is needed, resulting in considerable time ...
RENSON
... Heavy-duty extruded aluminium profile at 50 mm pitch with very high air flow. Applications Often to be found where the blade pitch reflects the aesthetics of the overall project design. Available as doors, shapes and circles. Materials Aluminium ...
RENSON
... Heavy-duty extruded aluminium profile at 66 mm pitch with high air flow. The largest of the “small” format louvres retaining high air flow characteristics whilst providing a significant degree of weatherability. Finish - Anodised ...
RENSON