Thermal conductivity: 0.08, 0.081 W/(m.K)
Thickness: 10 mm - 75 mm
... New construction and renovation for perimeter insulation in building construction with excellent insulation value Special features: • Suitable as light aggregate in gardening and landscaping. • High stability ...
MISAPOR
Thickness: 0.8 mm
... Structural protection mat for sound insulation Peace and quiet is a basic need that is highly valued in our time. Effective impact sound insulation increases quality of life; effective vibration insulation ...
KRAIBURG Relastec GmbH & Co. KG
Thermal conductivity: 0.039 W/(m.K)
Length: 1,200 mm
Width: 600 mm
... is a natural thermal and acoustic insulation mat made from flax fiber. NATURIZOL is the perfect choice for thermal and acoustic insulations of roofs, ceilings, and walls. Advantages of NATURIZOL • Thermal insulation ...
JUTA
Thermal resistance: 0.35, 0.5, 0.7 m²K/W
Thickness: 25, 35, 50 mm
Placoplatre
... Profloor Dynamic Deck 26 provides the high degree of isolation necessary to give significant improvements in impact sound insulation. Profloor Refurb Deck System utilises the dynamic properties of dual foam technology and a patented edge ...
A. PROCTOR GROUP
Saint Gobain Rigips
Thickness: 40 mm
... CHARACTERISTICS: Joint: R – residential Width (mm): 500 Thickness (mm): 40 External finish: L (smooth) Internal surface: flat / ribbed Internal finish: GS (stucco) Profile height: standard ...
Thermal conductivity: 0.035 W/(m.K)
Thickness: 4 mm - 80 mm
... special coating, they are ready to be tiled, rendered or plastered. Their excellent thermal insulation properties make them ideal for use as effective thermal insulation. The construction boards are perfectly suited for ...
Jackon Insulation
Thermal conductivity: 0.035 W/(m.K)
Thermal resistance: 3.4 m²K/W - 7.55 m²K/W
Thickness: 120 mm - 265 mm
URSA France
Thermal conductivity: 0.036 W/(m.K)
Thermal resistance: 0.8 m²K/W - 6.65 m²K/W
Thickness: 30 mm - 240 mm
... AREAS OF APPLICATION : Flexible cavity insulation in roof, dry wall and floor constructions Cavity insulation for partition walls, dry external walls and service zones MATERIAL : Wood fibre insulation ...
STEICO
Thermal conductivity: 0.038 W/(m.K)
Thickness: 60 mm - 150 mm
GUITTET
... Insulation made from PIR-foam, available in a broad variety for above rafter insulation on the roof and and floor insulation. ...
Thermal conductivity: 0.024, 0.025, 0.026 W/(m.K)
Thermal resistance: 0.96 m²K/W - 6.65 m²K/W
Thickness: 25 mm - 160 mm
... CARLISLE® Thermal Insulation-T is a high performance tissue faced insulation board that has been specifically designed for use with award-winning RESITRIX® and HERTALAN® waterproofing membranes, in both new build and ...
CARLISLE Construction Materials GmbH
Thermal conductivity: 0.039 W/(m.K)
Thickness: 70 mm
... Improves acoustic insulation Consistently uniform board dimensions make installation quicker and easier Homogeneous, single-ply construction Optimum thermal insulation Superior thermal storage capacity provides outstanding ...
GUTEX
... sheets integrated with metal panels and insulation in a complete metal roofing system. Metal panels bring unmatched durability. Insulation can build R-value into the system. Fabral technology has gone beyond insulation ...
FABRAL
Thermal conductivity: 0.042 W/(m.K)
Thermal resistance: 0.45 m²K/W - 3.8 m²K/W
Length: 1,900 mm
isonat
Thermal conductivity: 0.023 W/(m.K)
Thickness: 3 cm - 12 cm
... POLYSOL IP 35 PLUS is an insulating system obtained through the hot bonding of a smooth or mineralcoated plastomeric waterproofing membrane reinforced with glass fibre non-woven polyester fabric to sheets of foam PUR/PIR rigid polyisocianurate ...
Polyglass Spa
The gray Basotect® UF is characterized by a very high elasticity and by improved fire properties, which makes this elastic version of Basotect suitable for the construction industry and rail transportation, providing much greater freedom of processing ...
Basotect
Thermal conductivity: 0.028, 0.025 W/(m.K)
Thermal resistance: 1.05 m²K/W - 6.4 m²K/W
Thickness: 30 mm - 160 mm
... POLIISO® SB is a yellow thermal insulation panel made of rigid, closed-cell PIR foam, expanded between two supports: the top one is made of bituminized glass fiber and the bottom one of saturated glass fiber. The panels ...
Ediltec
... high density expanded polystyrene (EPS) radiant heat insulation product that increases installation speeds, is easily cut to meet any angle or radius while providing R-10 of insulation value. Insulation ...
NADURA
... ISOTEC Isotec is an under-tile thermal insulation system for pitched roofs, developed for refurbishment interventions and new roofing. It involves laying modular structural panels, light and consisting of an insulating ...
BRIANZA PLASTICA
Thickness: 25 mm - 100 mm
... SilveRboard Rigid Foam Insulation is a high performance flat-sheet insulation material made from Expanded Polystyrene (EPS) which is coated with a layer reflective lamination on both sides. This highly effective combination ...
amvicsystem
Thermal conductivity: 0.038 W/(m.K)
Thickness: 40 mm - 140 mm
... Application area: No compressive strength requirements. Insulation of: Façades Walls, interior insulation (behind brick lining or metal stud construction) ...
FOAMGLAS®
... DensDeck Prime is a trusted and durable roof substrate that can be used in virtually any commercial roofing system. DensDeck Prime can mitigate the risk from fire, foot traffic, and hail damage, helping to add lifespan to the roofing system. DensDeck ...
Georgia Pacific
... An external wall insulation system with EPS board and entirely cement-free components, providing market-leading impact resistance of 60 joules, up to 10 times greater than a similar cementitious system. StoTherm Classic was introduced ...
Sto AG
Thermal conductivity: 0.08 W/(m.K)
... covering the dry fill with a soft wood fiber insulation board. This results in a very good pressure distribution and visibly relieves working in the space. The BISOTHERM® Bio dry fill improves sound insulation. The impact ...
BISOTHERM
... edges, rebated or male-female interlock, density 300 to 700 kPa High comfort levels with Tegotherm XPS The thermal insulation of buildings using the high performance Tegotherm XPS boards results in high comfort levels and healthy ...
TEGOLA CANADESE
Thermal resistance: 3.45, 3.9, 4.35, 3.05 m²K/W
Length: 3 m
Thickness: 70, 80, 90, 100 mm
... waterproofing solution and insulation, is recommended. SOMDRAIN® RT5 is applied vertically in contact with buried structure walls : residential, business or industrial premises. It simultaneously ensures the protection and thermal ...
Length: 50 m
Width: 1 m
Thickness: 0.1 mm
... Non-combustible air & vapour control layer. It is used for internal or facades (depending on climate), in new builds and refurbishments. - Applications: - Facade or internal (depending on climate) - Timber frame constructions - Public buildings ...
WINCO TECHNOLOGIES
... through building fabric via conduction, convection, and radiation. Traditional bulk insulation mainly addresses conduction by trapping air in a thick matrix. Multi-foil insulation introduces a second line of defence: ...
Intech Foil Co.,Ltd
... Material for insulating and caulking stainless steel pipes for flue pipes and oven insulation. - Aluminized Rock Wool Insulating Cups - Calcium Aluminate Cement - Ceramic Fiber Insulation - ...
... reliable, efficient and economical insulation. Its mineral composition ensures not only absolute fire resistance and high insulation performance, but also a low carbon footprint and complete recyclability High thermal ...
... non-insulated shutter housings up to 60% efficient insulating and handling properties, flexible profile cut 2-parts, simple mounting due to key and slot joint, optionally extendable insulating mat 100 x 50 cm, insulating ...
Length: 110 in
Width: 47 in
Thickness: 12, 24 mm
... Increase acoustic absorption and visual allure with acoustic panels, composed of 100% PET plastic containing at least 60% post-consumer content. Acoustic Data 0.45-1.0 NRC Fire Rating ASTM E84 Class A Material 100% PET (60% post-consumer ...
Kirei USA
... system - on the insulation, get set, go! For new applications – just unfold it and you're done For new applications in radiant heating and cooling systems, Roth provides the new Flipfix Tacker system. It is suitable for use where ...
Thermal conductivity: 0.05 W/(m.K) - 0.39 W/(m.K)
... generation especially HRSG duct insulation • Industrial and Commercial Chimney insulation • Furnace, Boiler and Heater linings • Pipe wrap • Back-up linings in kilns and furnaces • Consumer goods • Storage heater ...
Morgan Advanced Materials
Thermal conductivity: 0.038, 0.034, 0.041 W/(m.K)
Length: 300 mm - 1,200 mm
Width: 300 mm - 1,200 mm
... agent technology in terms of environmental protection. Global Warming Potential = 1. The spray system combines excellent insulation performance with easy in-situ application. They are suitable to be applied on floor, wall and roof. Low ...
SYSTEMHOUSE
the best suppliers