Protective admixture ADDITIV A

indooroutdoor

Application
Jansen Additive A can be mixed into Aqua Metal Protection 3 in 1 without iron mica to increase sag resistance on vertical surfaces during spray application. For colour adjustment when using iron mica, use Additive SRS; consult the technical data sheet.

Product properties

• Prepares Aqua Metal Protection 3 in 1 (without iron mica) for airless spray application
• Reduces overspray and increases transfer efficiency
• Allows higher film build in a single pass — up to 350 ml/m² (350 µ) without running

Drying
Higher single-coat thicknesses achieved with Additive A can result in longer drying times.

Spreading rate
125 ml Additive A is sufficient for 2.5 L Aqua Metal Protection 3 in 1.

Package size
125 ml.

Technical specifications

• Brand: Jansen
• Model: Additive A
• Intended use: Mixed into Aqua Metal Protection 3 in 1 (without iron mica) to improve vertical sag resistance during spray application
• Effect: Reduces overspray; increases transfer efficiency; permits higher single-coat thicknesses
• Maximum single-coat thickness: up to 350 ml/m² (350 µ) without running
• Mixing ratio: 125 ml Additive A per 2.5 L Aqua Metal Protection 3 in 1
• Pack size: 125 ml
• Drying: Longer drying time expected at higher film builds
• Compatibility: For colour adjustment with iron mica, use Additive SRS