Insulating coating NANOLIA MIDCOAT

smoothinganti-corrosionfor renovation

Product Overview
KIN Nanolia Midcoat is a waterborne, thick-coating paste that incorporates SiO2 aerogel as the core insulating filler combined with high-performance resin and inorganic binders to form a dense nano-insulation layer. Thermal insulation is achieved through combined mechanisms of reflection, radiation reduction and barrier effect.

Application

• Building: exterior and interior walls, roofs, basements, energy-efficiency renovation projects.
• Industrial: medium/low-temperature storage tanks, pipelines, equipment, valves and flanges.
• Transportation: refrigerated trucks and cold-chain container insulation.

Key benefits

• Thermal performance: thermal conductivity λ ≤ 0.044 W/(m·K); 1–3 mm dry film offers insulation comparable to approximately 30–40 mm of conventional insulation.
• Space and weight saving: typical coat 1–1.5 mm per layer, low added mass, suitable where limited space is available.
• Application versatility: compatible with spraying, troweling and screeding; formulated for thick-coat application without cracking.
• Safety and environmental: waterborne, VOC-free, Class A fire rating, hydrophobic properties.
• Durability: high adhesion, aging resistance and seamless application that minimizes thermal bridges.

Install Guide

• Substrate preparation: ensure substrate is sound, clean, dry and free of contaminants; steel surfaces require rust removal and anti-corrosion treatment.
• Mixing: stir slowly with a mechanical mixer; dilute up to 5% with clean water if required; avoid high-speed mixing.
• Application: apply by spraying, troweling or screeding in 2–3 coats; single wet coat ≤ 2–3 mm.
• Dry interval: allow surface to dry approx. 2–4 h at 25°C before next coat.
• Curing: natural cure ≥ 7 days; protect from water and mechanical impact during curing.

Storage

• Store sealed in a cool, dry place at 5–35°C.
• Shelf life (unopened): 12 months from manufacture.
• Values stated are nominal; actual performance may vary with application method, substrate condition and environmental factors.

Technical specifications

• Core insulation: SiO2 aerogel with high-performance resin and inorganic binders.
• Thermal conductivity: λ ≤ 0.044 W/(m·K).
• Thermal equivalence: 1–3 mm dry film ≈ 30–40 mm conventional insulation.
• Typical coat thickness: 1–1.5 mm per coat; single wet coat ≤ 2–3 mm.
• Recommended coats: 2–3 coats.
• Dry interval between coats: approx. 2–4 h at 25°C.
• Cure time: ≥ 7 days (natural cure).
• Application methods: spraying, troweling, screeding.
• VOC: waterborne, VOC-free.
• Fire rating: Class A.
• Hydrophobic: yes.
• Storage temperature: 5–35°C.
• Shelf life (unopened): 12 months.