• Products
  • Catalogs
  • News & Trends
  • Exhibitions

Repair mortar FN SUPER
smoothingrestorationfor masonry

Repair mortar - FN SUPER - KINJOYA  - smoothing / restoration / for masonry
Repair mortar - FN SUPER - KINJOYA  - smoothing / restoration / for masonry
Add to favorites
Compare this product

Characteristics

Type
repair, smoothing, restoration
Mortar applications
for concrete, for masonry
Component
cement-based, polymer
Color
sand
Other characteristics
ready-to-use, anti mould

Description

Product description JOYA FN SUPER is a single-component, polymer-modified dry-mix mortar composed of specialty cement, quartz sand, redispersible polymer powder and functional additives. It provides repair, leveling, waterproofing, moisture resistance, anti-permeability and anti-mold performance while remaining non-toxic and low-VOC.

Application
  • Designed for damp-proofing and mold-resistant waterproofing in basements, water tanks, tunnels and parking structures.
  • Suitable for thin-layer repair and restoration of damaged concrete and masonry surfaces to restore integrity and appearance.

Key benefits
  • Grade I mold resistance
  • Negative-side waterproofing repair capability
  • High flexural and compressive strength
  • Strong adhesion to typical construction substrates
  • Low VOC, non-toxic formulation

Installation Apply at ambient temperatures between 5°C and 35°C (41°F–95°F). Do not apply in rain, snow or wind above force level 5; protect fresh mortar from precipitation until fully cured. Working time is approximately 40–60 minutes depending on temperature and humidity. Do not remix or reuse mortar with added water after initial setting. Substrate must be sound, clean and free of dust, grease and loose particles.

Storage
  • Store in a dry, cool and well-ventilated area at 5–35°C.
  • Shelf life: 12 months under proper storage and transportation conditions.
  • Actual performance may vary with substrate conditions, application method and environment.

Technical specifications
  • Composition: specialty cement, quartz sand, redispersible polymer powder and additives.
  • Product type: single-component dry-mix waterproof mortar.
  • Primary properties: repair, leveling, waterproofing, moisture resistance, anti-permeability, mold resistance.
  • Working time: approx. 40–60 minutes (temperature/humidity dependent).
  • Application temperature range: 5°C–35°C (41°F–95°F).
  • Shelf life: 12 months with proper storage.
  • Mold resistance: Grade I.
  • Typical uses: basements, water tanks, tunnels, parking garages, thin-layer concrete and masonry repair.
  • Mechanical: high flexural and compressive strength; strong adhesion; suitable for negative-side waterproofing repair.
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.