Electric bike charging station 2663-020500-0801114_V.1600

for electric scootergalvanised steelpainted steel

Overview
The LOCKEEL® e-bike charging station provides secure outdoor storage and simultaneous charging for e-bike, pedelec and electric scooter batteries as well as small power tools and technical equipment. The unit includes eight spacious compartments, each fitted with two protected sockets (IP54, 230 V, 16 A) and overvoltage protection.

Construction and weather resistance
The cabinet is manufactured from moisture- and weather-resistant galvanized sheet steel with a UV-resistant baked enamel finish. Double-walled doors provide dust- and moisture-protected storage and close flush using magnetic catches. Doors include rubber bumpers to reduce noise during closing.

Electrical equipment
Each charging compartment is equipped with two IP54 sockets (230 V, 16 A) with surge protection. Sockets in the upper compartments are slightly offset downwards for easier access. The station also features two service compartments located at the base.

Base and installation
The rust- and weather-resistant base has leveling feet for stable positioning and is prepared for firm anchoring. The station must be installed on a stable concrete foundation (minimum 86 x 62 cm, recommended depth 50 cm). Route a conduit with a three-core supply cable (minimum 2.5 mm²) through the centre of the foundation. A drilling template for anchoring is included; see the operating instructions for full installation details.

Quality features

• Sheet steel construction (body: 1.0 mm; doors: 1.5 mm)
• Two protected sockets per compartment (IP54, 230 V, 16 A) with overvoltage protection
• Double-walled doors with magnetic closing and rubber bumpers
• Prepared base for anchoring, leveling feet for stable installation

Locking and service compartments
The station is available in several colors and can be fitted with different locking systems. The service compartment(s) at the base are supplied with a cylinder lock as standard. A master key for emergency opening is included with delivery.

Assembly instructions
Install the station on a concrete foundation (min. 86 x 62 cm; recommended depth 50 cm). Route a conduit through the centre of the foundation and provide a three-core connection cable (min. 2.5 mm²). Use the supplied drilling template for anchoring. Refer to the operating instructions for detailed assembly and electrical connection procedures.

Technical specifications

• Number of doors: 8
• Compartment depth: 60 cm
• Tray height: 36.9 cm
• Tray width: 40 cm
• Locking system: Cylinder lock, 2 keys (service compartment standard with cylinder lock; master key included)
• Charging ports: F-type plug (each compartment: two IP54 sockets, 230 V, 16 A, with overvoltage protection)
• Material: Galvanized steel sheet
• Sheet thickness (body): 1.0 mm
• Sheet thickness (door): 1.5 mm
• Overall height: 215 cm
• Overall depth: 63 cm
• Overall width: 86 cm
• Weight: 235 kg