is a water repellent, vapour permeable, siloxanic, thick coating for exteriors (0.7÷1.2mm), characterised by a "troweled" finish. The product is formulated with siloxanic resins in water dispersion, which guarantee excellent resistance to climatic conditions, leaving unaltered the vapour permeability of the surface, and prevents the development of moulds and algae. Furthermore, the product is resistant to acids and frost thaw cycles. Thanks to its high level of water repellence, DECORSIL BOLOGNA keeps masonry dry and improves energy saving and also insures the best hygienic conditions and house comfort. It can be used as a finish coat both on high diffusion plasters and on all wall surfaces. For its special characteristics, the product is recommended above all for prestige buildings and for the refurbishment of old town areas. It has a low odour level, is non inflammable and is friendly to both humans and the environment.
Ideal use
Exterior walls of prestigious buildings, especially indicated for use on high diffusion plasters.
Surface preparation
The surface must be completely dry and mature, new plaster must be left to mature for at least 30 days in order to all full carbonisation of the support. Clean the surfaces to be treated removing loose or flaking materials. In case of new plasters, make sure the substrate is thoroughly dry. In restoration projects, insure that all water infiltration or leaks are repaired. Allow the wall to dry, then apply the correct primer either Decorsil Primer or Decorsil Primer Pigmentato by OIKOS. Allow the primer to dry for 12 hours then apply the finishing products.