is a special acrylic protective coating for concrete with a transparent, wet look finish. The product consists of modified acrylic resins in water dispersion, which provide a waterproof protective coating resistant to penetration of CO2 and SO2 gases present in rain and smog, to frost thaw cycles, and to the low pH level of the cement. BETONCRYLL TRANSPARENT provides an anti carbonation barrier and protects concrete against the oxidation of the reinforcing iron rods. Due to its high vapour permeability the product can be applied onto masonry, fiber cement and stone. It has a low odour level, is non inflammable and is friendly to both humans and the environment.
Ideal use
Protection and decoration of reinforced concrete, stone and bricks.
Surface preparation
Carefully clean the surface to be treated removing any loose or flaking material, dust, smog or dirt by brushing thoroughly or washing the surface. New surfaces must be thoroughly dry and mature and free from grease and lubricants.
Application method
On old and powdering surfaces apply as a primer, a coat of BETONCRYLL TRASPARENTE diluted 70÷80% with drinkable water. After preparation of the surface apply by brush, roller or spray gun (nozzle 1.3÷1.7mm), two coats of BETONCRYLL TRANSPARENT, leaving 4 hours between coats, diluting the first coat 40% and the second 20% with drinkable water. BETONCRYLL TRASPARENT is recommended for protection of exterior tiles, natural stone and bricks.