Exhibit with us
*myarchiexpo  
English
  1. Flooring & Wallcovering
  2. Paver, poured flooring
  3. Concrete paver
  4. REPLIK

Concrete paver PA03
outdoorpatinastone look

Concrete paver - PA03 - REPLIK - outdoor / patina / stone look
Concrete paver - PA03 - REPLIK - outdoor / patina / stone look
Concrete paver - PA03 - REPLIK - outdoor / patina / stone look - image - 2
Concrete paver - PA03 - REPLIK - outdoor / patina / stone look - image - 3
Concrete paver - PA03 - REPLIK - outdoor / patina / stone look - image - 4
Concrete paver - PA03 - REPLIK - outdoor / patina / stone look - image - 5
Add to favorites
Compare this product
Go to the REPLIK website for more information

Characteristics

Material
concrete
Location
outdoor
Finish
patina
Appearance
stone look
Technical characteristics
anti-slip, frost-resistant
Shape
square
Height

80 mm
(3 in)

Description

Description
  • PAVING STONES 14 x 14
  • OLD STONE APPEARANCE
  • Sales unit (U) = m²
  • equivalence: 1 m² = 6 ml / 1 row 14 cm wide


Geometry and packaging
  • Dimensions (cm): length 14, width 14, thickness 8
  • Weight (kg/U): 140
  • Indissociable set of 42 pavers per m²
  • Packaging (U/pallet): 9 (lost pallet 110×90)


Installation
  • Specifications of standard NF P 98 335 and CCTG booklet 29 apply.
  • Installation is carried out between +5°C and +30°C on a sound substrate.
  • Mortars are prepared or supplied as work progresses.
  • The bedding mortar is leveled with a straightedge and placed progressively. Thickness should be as uniform as possible (~4 cm).
  • Pavers must be moistened, especially in hot weather.
  • During laying, mix products of different colours and shades from different batches.
  • Joints are formed between pavers. Joints are filled with mortar no earlier than 24 h after laying and no later than 72 h.
  • Joint width must be as small as possible compatible with product geometry, not less than 5 mm.
  • Immediately after jointing, clean the pavement to avoid any film or deposits on the paver surface.
  • Expansion joints must be provided in accordance with normative requirements (10 ml or 20 m²).


Maintenance
  • Original colors are very stable, requiring minimal maintenance and will develop a natural patina over time.
  • Applying a mineralising treatment will ease cleaning and prolong the original surface appearance.
  • Use of high-pressure cleaners or acidic products is strongly discouraged as they may cause irreversible alteration.
  • De-icing salts should be used in reasonable quantities without excessive stagnant residues.


Table - Finishes
FINISHES: Old stone appearance

Characteristics / technical specifications
  • Bending strength (MPa): 4.7
  • Compressive strength (MPa): 50 (test specimen 16×32)
  • Water absorption: < 6 %
  • Frost resistance: 0.758 kg/m²
  • Slip resistance: minimum average 48 (indicative value obtained on an equivalent range product)
  • Regulatory framework: NF – EN – 1338
  • Sales unit: m²
  • Equivalence: 1 m² = 42 pavers (6 ml / 1 row of 14 cm wide)
  • Dimensions: 14 x 14 cm, thickness 8 cm
  • Weight per unit: 140 kg
  • Pallet packaging: 9 U / pallet (lost pallet 110×90)
Go to the REPLIK website for more information

Other REPLIK products

---

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.