|
|
TECU® Classic is the product name for traditional bright rolled TECU® sheets and TECU® strips. Initially, the material has the aesthetic qualities of the bright copper surface which, on exposure to the atmosphere, slowly changes to dark brown as the oxide layer forms and later develops copper's typical green patina layer on pitched surfaces.
The design and planning possibilities of TECU® Classic allow a continuous stream of new developments and innovative ideas in the world of today’s and tomorrow’s modern architecture.
|
|
|
The bright, shiny surface associated with freshly laid copper will not remain for very long when exposed to the environment. It is often thought, for a variety of reasons, to be a disadvantage to have to wait for the natural patina to form. Therefore this patination treatment method, Nordic Green PLUS™ has been developed.
|
|
Dark oxidized copper sheets and strips for building purposes
Nordic Brown™ has been developed in order to give a choice to architects. The dark oxidized surface is equivalent to the degree of natural oxidation obtained before the development of a green patina can be observed.
|
|
|
Nordic Cassette systems are designed for facades as well as ceilings and partition constructions in-house.
|
|
|
Flat copper sheets and strip used for building purposes are made of phosphor-dioxidised copper in various tempers, annealed, half hard or hard. The majority of copper roofing is undertaken in the long strip method using half hard temper.
|
|
|
The Modern Way to the Golden World. Copper is an ideal material for different kind of applications due its longevity, corrosion resistance and workability. It's easy to form, natural and environmentally friendly material for all kind of applications. Nordic Royal™ gives you these same special properties; with the golden colour! Nordic Royal™ is suitable for interior and exterior facades, roofs, decorative furnishings, elevator walls, fireplace hoods, door and window frames, door panels, decorative purposes, lamps and memorials.
|
|
|
TECU® System Shingles are large format copper cladding elements for roofs and walls that offer advantages in design and price. KME-manufactured shingles allow builders to cover façades, roofs and individual building elements quickly, easily and economically.
|
|
RHEINZINK® - Tile Systems
RHEINZINK-tiles include flat-lock, square and diamond-shaped tiles. Flat-lock tiles are primarily used for large façade surfaces. This is where their visual impact is the most impressive.
The square and diamond-shaped tiles comprise the group of RHEINZINK-small tiles. Due to the small size of individual components, design solutions can even be found for geometrically complicated buildings. Among other things, traditional cladding of roof dormers, chimney heads or roof edges with small tiles is not a problem.
|
|
Type MS350CR6
Effect: Crepe
Material: Stainless Steel Aisi 316 L
Thickness: ~ 0.07 mm
Open area: ~ 30.7%
Weigth: ~ 0.193 Kg/ m2
Maximum width: 2000 mm
Application: Curtains, ceilings, facades, sun screen, room wall cladding and dividers, product design…
|
|
|
|
|
|
Variable Profiles Energize a Building's Design
Engineered to provide the highest levels of creative flexibility, Dimension Series panels are available in a variety of profiles or curved configurations to accommodate virtually any design requirement.
Features
- Horizontal and vertical designs available
- A variety of reveal, thickness and profile configurations are available, providing design flexibility and options for exterior walls
- Concealed clips and fasteners plus dry gaskets and concealed sealants provide a clean, uninterrupted appearance while minimizing exterior dirt streaking and staining
- Factory foamed for dependable thermal performance
- Profiled and flat panels integrate with CENTRIA Formavue® window systems, and most glass wall and window systems
- Rainscreen Principle horizontal joinery provides superior weather resistance
- Pressure equalization achieved through vents along the panel length where required
- Factory-formed sheet metal flashing or extruded aluminum trim available
- Panel mitering permits clean, sharp corners, beam and column wraps
- Trimless ends
- Thermal break between face and liner
- Lightweight - easy to handle and install; less framing required
- Stainless, smooth and embossed surface treatments available
Metal
- Standard - 22/26 gage (0.76mm / 0.48mm), 22/22 gage (0.76mm / 0.76mm)
- Optional gages available, consult CENTRIA
- G-90 (Z275) galvanized steel; optional stainless steel available, consult CENTRIA
|
|
The revolution for the nobility and the sobriety arrives from the stainless steel, now with new textures, engravings to acid, polished to the letter and color, much color, to give life to new projects, new ideas, new esthetic options.
Coloration obtained by means of electrochemical or from PVD, totally stable and lasting processes. One provides in plates of different measures and thicknesses that can be cut, be doubled voluntarily and be manipulated.
Engravings to acid, polished mechanics and masks of color, with an extensive one provided of landlords standard or exclusive personalizations.
|
|
|
EUROSLOT stainless steel structures allow buildings to be covered by a double skinned (or second layer) which will sometimes appear transparent and at other times opaque depending upon the intensity of light, the viewing angle and the observer's position.
|
|
Profile of cladding Bromo Armat Acistim
Steel is a material of reference in cladding. Bromo profits from the same quality of manufacture that the profile of Mauka.Bromo cover is in conformity with the professional rules of the claddings
Characteristics of the Bromo solution
The Bromo solution is available in 3 variations according to your localization. These characteristics relate to only the version to measure of the Panel Bromo 0,63 (in conformity with the professional rules of implementation). Technical opinion n° 3/03-390.
The ranges depend on the place and the installation requirements of the products.
The following table, faithful to the professional rules for manufacture and the implementation of the metal claddings, declines the ranges under the most current installation requirements.
|
|
Features
- Horizontal and vertical designs available
- Concealed clips and fasteners provide a sleek exterior appearance with proven long-term performance
- Optional reveals of varying widths
- Factory foamed for dependable thermal performance
- Rainscreen Principle horizontal joinery provides superior weather resistance
- Pressure equalization achieved through vents along the panel length where required
- Factory-formed sheet metal flashing or extruded aluminum trim available
- Trimless ends
- Thermal break between face and liner
- Lightweight - easy to handle and install; less framing required
- Advanced Fluorofinish PVDF, metallic, and mica color coating systems are available in over 70 standard colors
- Optional Duracast textured finish in eight standard earthtones
Metal
- Standard - 22/26 gage [0.76mm / 0.48mm], 22/22 gage [0.76mm / 0.76mm]
- Optional gages available, consult CENTRIA
- G-90 (Z275) galvanized steel; optional aluminum face available, consult CENTRIA
|
|
Mesh up to widths of 2000 mm
Long Way: up to 300 mm
Short Way: up to 100 mm
Strand Width: up to 35 mm
Materials:
Carbon steels; pre-lacquered; galvanized; Stainless steel; aluminium; copper; brass, titanium; plastics....
Finishes and coatings:
lacquering (RAL colours; textured; other special products...)
Anodized: metallic / organic
Hot and cold galvanising.
|
|
The careful selection of materials and construction systems which will be used in specific buildings are factors that require special attention from designers. The construction, operation and conservation costs for every technical solution should be exhaustively analysed so as to optimise the economic effectiveness of the building.
In the long-term, the use of high quality materials will be seen as financially advantageous. The functionality and durability of the materials, the energy savings achieved by using the best combinations and the comfortable environment thus obtained are just a few of the reasons behind these decisions.
The advantages of the SKINZIP® system are many and very easily identified. The aim of this presentation is to show how SKINZIP® works and demonstrate its potential. Our technical services department will also be happy to provide any
|
|
DESIGNER: Arch. Benedetto Camerana
PRODUCTS: 250 sqm of frames protected by COR-TEN steel blades, glazed floors and balustrade for steel suspended stairs.
|
|
Customised and modular systems
Planéa, Isofran, Promplan, coques MD, cassettes BS, ST Evolution 500-600-900 are cladding systems designed to enhance the surfaces of brickwork, concrete, or steel-sheet walls. Their characteristics may be adapted to new-build and refurbishment projects, to walls with openings.
|
|
Arclad offers a wide range of wall profiles in a choice of coatings and finishes to meet different budgetary, aesthetic and performance requirements.
The profiles can be used in a single skin construction or can be included as part of a built-up system including other components such as liners or structural trays. In this way, built-up systems can be designed to meet a range of thermal, fire and acoustic performance requirements whilst still offering a wide choice of aesthetic finishes.
|
|
Arclad offers a wide range of wall profiles in a choice of coatings and finishes to meet different budgetary, aesthetic and performance requirements.
The profiles can be used in a single skin construction or can be included as part of a built-up system including other components such as liners or structural trays. In this way, built-up systems can be designed to meet a range of thermal, fire and acoustic performance requirements whilst still offering a wide choice of aesthetic finishes.
|
|
This ribbed sheet has a corrugation of 20 mm height with a trough of 12 mm; because of this, the ribs are tight against one another without giving the impression of contraction.
The solid trough creates a plane support on which are reflected the light rays and a contact surface on which the shadow of ribs is in movement.
The TN 200 is ideal for decoration applications having a dominant linear appearance in a zone with variable lighting.
|
|
TREWALL
Cladding and supporting system for ventilated facades
Trewall is an integral supporting system for buildings with ventilated facades; consists of modular steel elements which are anchored and suspended on the sole, they strengthen and rivets the primary structure and are at the same time a carrying system for the elements of the facade composition. This system allows anchoring any wall cladding. This allows the architect to be flexible and free to choose from materials, because he external revetment becomes only an aesthetic issue.
|
|
|
|
Metal facade cladding
