Polyester flooring

GRPresinindoor

Product information
The MEISER GRP safety flooring is composed of a load-bearing GRP grating with a laminated GRP panel on top. Standard panel thickness is 3 mm; an optional 5 mm panel is available. The grating surface is ground flat before panel lamination to ensure optimal bonding. All moulded GRP gratings can generally be used as the supporting element. MEISER supplies a selection of common stock types matched in height to other stock gratings to enable continuous coverage of large areas without tripping edges. Typical in-stock surface is corundum-gritted (KB); consult anti-skid information for selection.

Technical data
Technical data sheet available for GRP Safety Flooring (English PDF available).

Accessories / Fixing clips

• GRP Safety flooring saddle clip M0400: deep-drawn disc upper part, hex head screw M8 (length on request), washer 8.4 mm & self-locking nut M8.
• GRP Safety flooring saddle clip M2000: flat headed screw M8 (length on request), washer 8.4 mm & self-locking nut M8.
• GRP Safety flooring saddle clip M2900: raised disc upper part, hex head screw M8 (length on request) & self-locking nut M8.
• GRP Safety flooring double clamp V M0440: 2x deep-drawn disc upper parts, clamp lower part, 2x hex head screw M8 (length on request) & 2x square nut M8.
• GRP Safety flooring double clamp V M2040: 2x flat headed screw M8 (length on request), clamp lower part & 2x square nut M8.
• GRP Safety flooring double clamp V M2940: 2x raised disc upper parts, clamp lower part, 2x hex head screw M8 (length on request) & 2x square nut M8.
• GRP Safety flooring Clamp S M20: flat headed screw M8 (length on request), clamp lower part & square nut M8.
• GRP Safety flooring Clamp T M04: deep-drawn disc upper part, clamp lower part, hex head screw M8 (length on request) & square nut M8.
• GRP Safety flooring Clamp T M29: raised disc upper part, clamp lower part, hex head screw M8 (length on request) & square nut M8.

Characteristics / Technical specifications

• Construction: GRP grating as bearing element with laminated GRP panel on top.
• Standard panel thickness: 3 mm; optional: 5 mm.
• Surface preparation: grating surface ground flat before panel lamination for optimal bonding.
• Compatibility: suitable for all moulded GRP gratings; in-stock types matched in height to avoid tripping edges.
• Surface options: various finishes available; corundum-gritted (KB) commonly used for anti-skid performance.
• Application: industrial safety flooring for continuous coverage of large areas.