Protective coating ELASTRONG GUM

exteriorfor wallfacade

is a pigmented elastic coating for exterior surfaces, to be used as an intermediate coat in the smooth elastomeric cycle that will be completed with a coat of ELASTRONG PAINT GUM by OIKOS. The product contains acrylic elastomeric resins in water dispersion, organic and inorganic pigments and titanium dioxide. The special elastomeric resins make the product highly elastic, water ¬repellent, resistant to light, to weather conditions and to pollution: it also prevents the formation of mould and algae. The product remains elastic over time, even when subject to frost and thaw cycles and U.V. rays. ELASTRONG GUM is recommended for protecting and restoring all wall surfaces, and especially those subject to cracking or fissures. It has a low odour level, is non inflammable and is friendly to both humans and the environment. Ideal use Exterior walls that are subject to cracks and fissures. Surface preparation On old surfaces or surfaces with existing layers of paint, remove or wash away all loose or flaking material, smog stains, dust or dirt. Apply one coat of the special primer NEOKRYLL by OIKOS. Wait 4÷6 hours until dry. New surfaces must be thoroughly dry and mature, on new surfaces then apply one coat of the primer BLANKOR by OIKOS to improve the adhesion and render the absorption homogenous. Wait 6÷8 until dry. Application Method To obtain a smooth finish, apply by brush or by wool short hair roller a coat ELASTRONG GUM diluted with 10% water. For application by spray gun dilute with 25% water.