Central control unit MAGNUM W-Controller

for home automation systemsindoor

MAGNUM Remote Zone Control
MAGNUM Remote Zone Control is a complete system for controlling your underfloor heating. The system consists of thermostats that can be hung in each room and a controller that is mounted near the manifold. The advanced actuators receive a signal through the controller whether they should be opened or closed depending on the temperature demand. Control the zones separately through the thermostat or through your tablet or smartphone.

MAGNUM W-Controller
The MAGNUM W – Controller receiver is specially designed to control the temperature of underfloor heating systems through the “normally closed” actuators. Each receiver can control 8 zones and can be expanded as required.

MAGNUM W-Thermostat
The MAGNUM W – Clock Thermostat ensures precise control of the room temperature. With this clock thermostat you can adjust the temperature based on a series of programmed settings that take effect at different times of the day. The thermostat is connected wirelessly to the MAGNUM W – Controller and transmits a signal when the temperature changes.

MAGNUM W – Actuators
These electrothermal actuators are used to automatically control the stopcocks. When the actuators are mounted on the taps, they automatically shut off the water supply from the boiler. As soon as there is a heat demand from the underfloor heating system, the thermostat, which is connected to the receiver, causes the actuators to open the stopcocks so that hot water from the boiler can be let into the manifold. When the correct temperature is reached, they close the stopcocks again.

References
Art.nr. | Description
W80001 | MW – C Central 8-zone control – App control
W80000 | MW – T Room thermostat Digital, wireless RF
W80003 | MW – A Actuator / thermomotor 230V NC

Specifications
Type | Wireless thermostat
Suitable for | Water based systems
Controls | On thermostat and through app
Sensors | Room sensor
Voltage MW – C | 230V – 50/60Hz
Voltage MW – T | 3x AAA battery
Voltage MW – A | 230V – 50/60Hz
Max. number of groups | 32 per MW – C station
Temperature range | 1°C – 40°C
Housing | IP21
WiFi | Yes (LAN connection required)
App | Yes, iOS & Android
Voice assistant | No
Programmable | Up to 2 periods per day
Intelligence | Yes
Wooden floor | Yes, < 28°C

Technical details
Wireless control through thermostat, PC, Tablet or Smartphone
Heating and cooling mode
Set up to 8 zones
Merge zones easily
Up to 32 actuators can be connected
LAN connection necessary
Pump control function
Customised weekly programme
Bus connection for Smart Home functionality
Room/floor sensor function

Warranty
2 year warranty for MW-C, MW-T and MW-A.