Electric underfloor heating DUOBOARD

for residential installations

Description
Stable base for soft floor coverings (carpet, PVC, rubber, linoleum, vinyl, cork, etc.). Applicable on dry underfloor heating systems.

Summary
Panel designed for installation over underfloor heating to provide a soft, stable and level substrate for carpet, linoleum and similar coverings. DuoBoard consists of two HDF panel layers (base panel and covering board).

Usage and storage
Before installation, the product must be stored at least 48 hours at a temperature not lower than 18 °C and a relative humidity not exceeding 60% in the room where the DuoBoard system will be used. Base panels must be free of dust and dirt prior to installation. The base panel can be glued only once. The surface of the underfloor heating layer must be stable, flat and clean.

Product table
Art.nr. | Description | m² | Material | Dimensions
430030 | MAGNUM DuoBoard 2 x 4 | 2.88 m² | HDF panels | 1200 x 600 x 3 mm

Key properties
DuoBoard is characterized by low build-up height, high durability and high heat transmission.

Technical data (values)

• Density: 860 (kg/m³)
• Thermal conductivity λ: 0.192 (W/mK)
• Thermal resistance R: 0.037 (m K/W)
• Bending strength according to EN 310: ≥ 23 (N/mm)
• Tensile strength according to EN 319: ≥ 65 (N/mm)
• Swelling after 24 h according to ES 317: ≤ 60 (%)
• Formaldehyde content Class E1 according to PN-EN 120: max. 8 (mg/100g)
• Warranty: 2 years
• Presentation / product reference: Art.nr. 430030