OverviewThe perfect flatness turns each piece into a work of art. The frontal furrow gives it personality and homogeneity to the roof. The laying of Vienna roof tile is carried out by straight bond.
Data sheetVienna Roof tile
Dimensions* — A 460 mm / 18.11"
B 255 mm / 10.04"
C 30 mm / 1.18"
Pieces /m2 - P./sq. — 11.5 - 105
Weight piece — 3.6 kg / 8 lbs
Longitudinal fit** — 396mm (+5mm; -75mm) / 15.6" (+0.19"; -2.95")
Transversal fit** — 214mm (± 1mm) / 8.42" (±0.04")
Units per pallet — 216 / 288
Weight per pallet — 778 kg (1,715.2 lbs) / 1,037 kg (2,287 lbs)
Laying — Straight bond
*The tile dimensions indicated in this chart allow a tolerance of approximately +/-2% **Theoretic value: this should be re-calculated on site with the tiles that are to be used.
Features- EXCELLENT FLATNESS — Individual curing of each tile thanks to support in H, ensuring flatness with no contact points.
- HIGH DEFINITION ON EACH PIECE — Produced using gypsum moulds to obtain finer texture and precise definition on every tile.
- LOW ABSORPTION — Increased resistance to frost and mould formation.
- LIFETIME WARRANTY — 100 years of warranty ensuring long-term product reliability and consistent manufacturing quality.
Colour range- TVRK RED
- TVPK SLATE
- TVYK GALAXY
- TVRRK RUSTIC RED
- SPECIAL COLOURS UPON REQUEST
Certificates & notesColour variations within one batch, affecting the whole of that batch and produced specifically for aesthetic reasons, are permissible. For tiles of one single colour, variations in color due to the ceramic process itself are accepted. It is advised not to mix tiles from different batches on the same roof section.
Technical specifications- Model / Range — H-Selection Vienna Slate
- Dimensions A — 460 mm / 18.11"
- Dimensions B — 255 mm / 10.04"
- Dimensions C — 30 mm / 1.18"
- Pieces per m2 — 11.5 (105 P./sq.)
- Weight per piece — 3.6 kg / 8 lbs
- Longitudinal fit — 396 mm (+5 mm; -75 mm)
- Transversal fit — 214 mm (±1 mm)
- Units per pallet — 216 / 288
- Weight per pallet — 778 kg / 1,037 kg (depending on pallet configuration)
- Laying method — Straight bond