Rectangular roof tile H-SELECTION VIENNA

ceramicsmallred

Description
The perfect flatness turns each piece into a work of art. The frontal furrow gives it personality and homogeneity to the roof. The laying of Vienna roof tile is carried out by straight bond.

Features

• EXCELLENT FLATNESS: Individual curing of each tile thanks to support in H. Excellent flatness with no contact points.
• HIGH DEFINITION ON EACH PIECE: Made with gypsum moulds, providing a much finer texture.
• LOW ABSORPTION: Higher resistance to ice and mould formation.
• LIFETIME WARRANTY: 100 years warranty demonstrating manufacturing quality.

Data sheet
Vienna Roof tile
Dimensions* — A: 460 mm / 18.11"; B: 255 mm / 10.04"; C: 30 mm / 1.18"
Pieces /m2 - P./sq. — 11.5 - 105
Weight piece — 3.6 kg / 8 lbs
Longitudinal fit** — 396 mm (+5mm; -75mm) / 15.6" (+0.19"; -2.95")
Transversal fit** — 214 mm (± 1mm) / 8.42" (±0.04")
Units per pallet — 216 / 288
Weight per pallet — 778 kg (1,715.2 lbs) / 1,037 kg (2,287 lbs)
Laying — Straight bond
*The tile dimensions indicated in this chart allow a tolerance of approximately +/-2%
**Theoretic value: this should be re-calculated on site with the tiles that are to be used.

Color range

• Design and color variety for modern and vanguard architecture.
• Colour variations within one batch, affecting the whole of that batch and produced specifically for aesthetic reasons, are permissible. For tiles of one single colour, variations in color due to the ceramic process itself are accepted. It is advised not to mix tiles from different batches on the same roof section.

Certificates and compliance
The certified characteristics include appearance, geometric properties, flexural strength, impermeability and frost resistance. The VIENNA tile complies with EN 1304. Colour variations within a single batch are accepted for aesthetic reasons; to ensure visual uniformity it is recommended to use two or more pallets of the same batch and avoid mixing tiles from different production dates on the same roof slope.

Technical specifications

• Model / Range: Vienna (H-Selection)
• Dimensions A x B x C: 460 mm x 255 mm x 30 mm (18.11" x 10.04" x 1.18")
• Pieces per m2: 11.5 (105 P./sq.)
• Weight per piece: 3.6 kg (8 lbs)
• Longitudinal fit (theoretical): 396 mm (+5 mm / -75 mm)
• Transversal fit (theoretical): 214 mm (±1 mm)
• Units per pallet: 216 / 288
• Weight per pallet: 778 kg / 1,037 kg
• Laying method: Straight bond
• Key properties: excellent flatness, high-definition texture, low water absorption, lifetime warranty